Baumer Hubner EtherNet/IP HMG10 Betriebshandbuch - Seite 13
Blättern Sie online oder laden Sie pdf Betriebshandbuch für Medienkonverter Baumer Hubner EtherNet/IP HMG10 herunter. Baumer Hubner EtherNet/IP HMG10 44 Seiten.
Seite drucken
Baumer Hübner
Instruction:
a) Loosen the Torx screws.
b) If required, you may remove the Torx screws completely for turning around the torque plate.
Then carefully screw the Torx screws back in, but do not tighten already.
c) Move the torque support to the desired position.
d) Tighten the Torx screw with 2-3 Nm.
V1, T1 | HMG10 & HMG10P EtherNet/IP
Operating Manual
Installation
|
5
13