Baumer Hubner EtherNet/IP HMG10 운영 매뉴얼 - 페이지 13

{카테고리_이름} Baumer Hubner EtherNet/IP HMG10에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer Hubner EtherNet/IP HMG10 44 페이지.

Baumer Hübner

Instruction:

a) Loosen the Torx screws.

b) If required, you may remove the Torx screws completely for turning around the torque plate.

Then carefully screw the Torx screws back in, but do not tighten already.

c) Move the torque support to the desired position.

d) Tighten the Torx screw with 2-3 Nm.

V1, T1 | HMG10 & HMG10P EtherNet/IP

Operating Manual

Installation