Baumer OM30 Betriebshandbuch - Seite 29

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Messgeräte Baumer OM30 herunter. Baumer OM30 48 Seiten. Laser distance sensors

Baumer

8.6

Switching points

Via the Switching points function, distances (switching points) are defined at which the switching

output is to be activated.

The function can be configured via the following parameters:

Select measurement mode (point mode or window mode).

Define the position of the switching points (SP1 and SP2):

▪ Point mode: SP1

▪ Window mode: SP1 and SP2

Point mode

Ill. 10: Sensor in the point mode measurement mode

Purpose/application (example):

▪ Quality control: Check the minimum/maximum height of a measurement object.

▪ Reach a desired position with a tool that edits an object.

Window mode

Ill. 11: Sensor in the window mode measurement mode

The smallest switching window is 2 mm.

Purpose/application (example):

▪ Quality control: Check the dimensions of a measurement object within a tolerance win-

dow.

IO-Link parameter: Switching points

Parameter name

SSC1 Config.Mode Disabled,

SSC1 Param.SP1

SSC1 Param.SP2

OM20/OM30 | V1

SP1

SP1/SP2

Values

Single

Point, Window

Description

Selecting the switching output mode:

▪ Point mode: (switching point SP1)

▪ Window mode (SP1 and SP2)

Distance at which the SSC1 is activated or inacti-

vated.

Distance at which the SSC1 is activated or inacti-

vated. Only relevant for window mode.

Operating Manual

Functions