Amphenol RESMLAC 28 MG Installationshandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Installationshandbuch für Schalter Amphenol RESMLAC 28 MG herunter. Amphenol RESMLAC 28 MG 15 Seiten. Ip67 rugged ethernet managed switch
Auch für Amphenol RESMLAC 28 MG: Installationshandbuch (15 seiten)

Seite drucken
Amphenol RESMLAC 28 MG Installationshandbuch
RESMLAC 28MG IG rev. 1.3
Amphenol
– 948, Promenade de l'Arve – B.P. 29 – 74311 THYEZ Cedex – France - +33(0)4.50.89.28.00 – www.rjswitch.com
NETWORKING – SECURITY
•
Security via Radius Authentication 802.1x, Port / MAC access control
•
Port Security
•
Per port ingress and egress port mirroring.
•
Mirroring per VLAN and per content awareness match
•
Private VLAN support per VLAN (Isolated and Promiscuous ports)
•
Content Aware Policiers:
o 128 Content Aware Policers
o 16 Content Aware rate policers with rates from 1fps to 32 million fps
o 8 UDP/TCP port range policers
o Advanced ACL through hardware based match patterns
o Content Aware Policers for generic MAC, ARP, IPv4, IPv6 protocols
o No restriction on any mix of entries to Content Aware Policers
o Content Aware Policers actions are permit/deny, police, count, snoop and
mirror
o Special support for IP fragments, UDP/TCP port ranges and ARP
o Extensive CPU DoS prevention
o Surveillance functions by Content Aware Policers counters
o Multiple ACLs per port for optimal usage of Content Aware Policers
•
Storm controllers for flooded broadcast, multicast and Unicast
NETWORKING – REDUNDANCY AND RING PROTECTION
•
Spanning Tree (802.1d), RSTP (802.1w) and multiple Spanning Tree (802.1S) for
fast recovery rings
•
RPR for up to 30 units per ring with recovery time <50ms hardware based
•
20-Gbps bandwidth for ring topology
•
QoS consistency across stack / ring
•
Mirroring across stack / ring
•
Link aggregation groups spanning multiple switches in stack / ring
POWER
•
Voltage Input: 24Vdc Nominal (18-32V)
•
Option for Redundant Power Supply with load sharing, 48VDC and 90~230VAC
•
Power Consumption: 20W Typical
•
Exceed MIL-STD-1275B and MIL-STD-704A Surge and Spike protection with
50ms holdup time and 6VDC drops
•
Chassis grounding
Page 13 of 15
Last Rev: 1-Feb-21