Amphenol RESMLAC 28 MG Manuale di installazione - Pagina 13
Sfoglia online o scarica il pdf Manuale di installazione per Interruttore Amphenol RESMLAC 28 MG. Amphenol RESMLAC 28 MG 15. Ip67 rugged ethernet managed switch
Anche per Amphenol RESMLAC 28 MG: Manuale di installazione (15 pagine)
Stampa la pagina
RESMLAC 28MG IG rev. 1.3
Amphenol
– 948, Promenade de l'Arve – B.P. 29 – 74311 THYEZ Cedex – France - +33(0)4.50.89.28.00 – www.rjswitch.com
NETWORKING – SECURITY
•
Security via Radius Authentication 802.1x, Port / MAC access control
•
Port Security
•
Per port ingress and egress port mirroring.
•
Mirroring per VLAN and per content awareness match
•
Private VLAN support per VLAN (Isolated and Promiscuous ports)
•
Content Aware Policiers:
o 128 Content Aware Policers
o 16 Content Aware rate policers with rates from 1fps to 32 million fps
o 8 UDP/TCP port range policers
o Advanced ACL through hardware based match patterns
o Content Aware Policers for generic MAC, ARP, IPv4, IPv6 protocols
o No restriction on any mix of entries to Content Aware Policers
o Content Aware Policers actions are permit/deny, police, count, snoop and
mirror
o Special support for IP fragments, UDP/TCP port ranges and ARP
o Extensive CPU DoS prevention
o Surveillance functions by Content Aware Policers counters
o Multiple ACLs per port for optimal usage of Content Aware Policers
•
Storm controllers for flooded broadcast, multicast and Unicast
NETWORKING – REDUNDANCY AND RING PROTECTION
•
Spanning Tree (802.1d), RSTP (802.1w) and multiple Spanning Tree (802.1S) for
fast recovery rings
•
RPR for up to 30 units per ring with recovery time <50ms hardware based
•
20-Gbps bandwidth for ring topology
•
QoS consistency across stack / ring
•
Mirroring across stack / ring
•
Link aggregation groups spanning multiple switches in stack / ring
POWER
•
Voltage Input: 24Vdc Nominal (18-32V)
•
Option for Redundant Power Supply with load sharing, 48VDC and 90~230VAC
•
Power Consumption: 20W Typical
•
Exceed MIL-STD-1275B and MIL-STD-704A Surge and Spike protection with
50ms holdup time and 6VDC drops
•
Chassis grounding
Page 13 of 15
Last Rev: 1-Feb-21