COMBA CPBBUV1-48055-UL Handbuch zur Schnellinstallation - Seite 4
Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Konferenz-System COMBA CPBBUV1-48055-UL herunter. COMBA CPBBUV1-48055-UL 11 Seiten. Annunciator panel
Auch für COMBA CPBBUV1-48055-UL: Handbuch zur Schnellinstallation (10 seiten)
Seite drucken
At the annunciator panel, connect the communication cable extension as shown below. Be sure to note RED (A),
BLUE (B) and BLACK (GND) when configuring the pigtail/extension to the phoenix connector located in the
annunciator panel.
Annunciator Panel
3. Power Cable
For BBU V1, the power will be provided from one of three LOAD outputs. Choose an open load output
and connect the power cable to the + and – ports. The same communications extension cable can be
used for power (for example, CAT5 cable, with 3 wires for communication and 2 for power).
For the BBU V2, power can be sourced from the MCU/control board 12VDC, 24VDC or Load Terminals
©2021 Comba Telecom. All Rights Reserved.
568 Gibraltar Drive, Milpitas, CA 95035 | +1 408 526 0180 Ext 3 |
to Annunciator Panel
to Annunciator Panel
www.combausa.com
From BBU
BLUE (B)
RED (A)
BLACK (GND)
4
Version 1.0.4
1.16.23