COMBA CPBBUV1-48055-UL 빠른 설치 매뉴얼 - 페이지 4
{카테고리_이름} COMBA CPBBUV1-48055-UL에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. COMBA CPBBUV1-48055-UL 11 페이지. Annunciator panel
COMBA CPBBUV1-48055-UL에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (10 페이지)
페이지 인쇄
At the annunciator panel, connect the communication cable extension as shown below. Be sure to note RED (A),
BLUE (B) and BLACK (GND) when configuring the pigtail/extension to the phoenix connector located in the
annunciator panel.
Annunciator Panel
3. Power Cable
For BBU V1, the power will be provided from one of three LOAD outputs. Choose an open load output
and connect the power cable to the + and – ports. The same communications extension cable can be
used for power (for example, CAT5 cable, with 3 wires for communication and 2 for power).
For the BBU V2, power can be sourced from the MCU/control board 12VDC, 24VDC or Load Terminals
©2021 Comba Telecom. All Rights Reserved.
568 Gibraltar Drive, Milpitas, CA 95035 | +1 408 526 0180 Ext 3 |
to Annunciator Panel
to Annunciator Panel
www.combausa.com
From BBU
BLUE (B)
RED (A)
BLACK (GND)
4
Version 1.0.4
1.16.23