Amplicomms M24 Schnellstart-Handbuch

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Mobiltelefon Amplicomms M24 herunter. Amplicomms M24 2 Seiten.

Seite drucken

M24

Quick user guide

INTRODUCTION

M24 is Amplicomms new 2G clamshell mobile phone with 2.4

inches display, offering an amplified handsfree base.

M24 is a CARE PHONE with features :

• Loud speaker

• Talking dialing digits

• Easy-charging base with built-in Bluetooth handsfree system

• Talking caller ID name

• 10 Photo speed dial

• SOS button

• Smart Care features

• Hearing Aid Compatible (M4/T4)

A- PHONE DESCRIPTION

1 - Earpiece

9 - Microphone

2 - Display

10 - Right selection key

3 - Left selection key

11 - End / Power key

4 - Navigation key

12 - Torch key

5 - Answer/Call key

(Long press (3s) to

6 - Photo memory Key

activate/desactivate)

7 - Camera Key

13 - Camera lens

8 - Dialing keypad

14 - Torch/External LED

is the hot key for switching the keypad input

between ABC, Abc, abc & 123.

(Long Press # will activate / deactivate the Silent mode)

is the hot key for entering special symbol.

15 - Loudspeaker

18 - Headset jack

16 - SOS key

19 - Micro-USB socket

17 - Charging contacts

20 - Volume control

(Hearing, Ringer)

External LED

Flashing Red - Battery low

Flashing White - Incoming call

Flashing Green - Message / Missed call

Color Display

Vibrate then Ring

Vibrate only

Silence

Red – Ring; Green –

Ring & Vibrate

Base or headset

connected

B- BASE DESCRIPTION

Note! All the diagrams are for illustrative purposes. It may be

slightly different from the actual unit.

In keeping with our environmental preservation and

compliance commitment, we include Quick Start Guide in our

packaging. For digital copy and other useful information,

please visit our website or contact our Helpline.

www.amplicomms.com

GET STARTED

Installing the SIM card, memory card and

battery

ATTENTION :

•

Risk of swallowing small objects! The SIM card & memory

card can be removed. Small children can swallow them.

•

Do not bend or scratch the SIM card. Prevent any contact

with water, dirt or electrical charges.

• Turn off the phone and disconnect the charger before

removing the battery cover.

Remove the battery cover:

- Insert the Nano SIM card (mandatory) and the

microSD memory card (optional, not supplied):

1) Slide the small metal part to the left side to unlock it.

2) With the finger nail, lift it up softly to the left side

3) Place the SIM card in the SIM card holder with the golden

contacts facing down and the cut corner at the upper right

(drawing A)

4) Close the SIM card metal part and lock it by sliding softly to

the right (drawing B)

*To expand the internal storage memory, you can insert a

microSD memory card (maximum capacity of 32 GB / not

included). Insert the memory card into the slot until it stops as

illustrated.

- Insert the battery:

Battery power

Signal strength

Insert the battery into battery compartment with golden

contacts of the battery facing downwards to the right of the

phone. Press lightly on the top end of the battery until it

Roaming

snaps into place.

Replace and secure the battery cover until it clicks into

Bluetooth ON

place.

Bluetooth

connection

1 - Contact pins (for handsfree and

charging)

2 - Phone button

(Press to answer or end calls when

the phone is on the base)

3 - Volume - key

4 - Volume + key

5 - Pairing button

6 - Status LED (steady blue when

phone is BT connected)

7 - USB connector

Charge the phone

- Connect the USB plug of the adaptor to the charging socket

(A) or place the device in the cradle (B or C)

- When placed on the cradle, your phone will connect

with the base via Bluetooth (Base LED steady blue). You

can use the phone menus and make, answer, continue or

terminate calls in handsfree mode or listen to the radio on

the base loudspeaker.

(**A valid Bluetooth pairing between M24 and the base is

required; your system has been paired at the factory. In case

of need, see "PAIRING M24 WITH THE BASE")

ATTENTION:

• Only use battery, charger and accessories that have been

approved for using with this particular model. Connecting

other accessories may be dangerous and may invalidate the

warranty.

• When charging the battery for the first time, it should be

charged for at least 4 hours.

• When using the base, make sure phone orientation is

matching figures B or C

1st USE SETUP

Long press

to power up the phone

You may be requested to enter your Sim card PIN code

(4 digits) provided by your operator.

to select the desired language > OK

Input HH:MM >

> DD/MM/YYYY >

> Save

( Press Menu >

> Settings > Phone > ..... User can

modify the detailed settings )

Make a Call

Enter the number 0.....9 ( Press Clear to delete )

Press

to dial ( Press H-Free for Handsfree. Press H-Held

for Handset )

Press

to end the call

To desactivate/activate the talking keypad: Menu /

Settings / 1. Profiles / General / 2. Customize / 7. Keypad

ADD Phonebook contact

First contact:

Press Menu /

/ Phonebook /

/ 2. Normal / Options /

Name, input ABC.../

/ Number 012... / Options / Save

Then for additional contact:

Press Menu /

/ Phonebook /

/ 2. Normal /

Options / Name, input ABC.../

/ Number 012... / Options /

Save

Call from phonebook

Press

to select the 10 photo memories;

Press Names >

to select the number

Press

to dial

Press

to end the call

Receive a Call

Flip up the phone or press

to answer

Press

to end the call

When the phone is on the base (base LED steady

blue) you can use

base key to answer

and end the call in handsfree mode. You can also control

the base loudspeaker volume with

Settings ( Ring tone & Volume )

Press Menu >

> Settings >....

Under the Settings menu, the following options can also

be accessed

1. Profiles

2. Phone ( Setting Date/Time, Languages,.... )

3. Charger LED ( Activate / Deactivate )

4. Tone Control

5. Call settings

6. Security (password : 1122)

7. Restore (password : 1122)

( Press Menu >

> Settings > Profiles > General >

Customize..... User can select the Ring tone, Volume and

others )

CALL Log

Press Menu >

> Call Log >.....

1. Missed

2. Dialled

3. Received

Press

to select the desired number

Press

to dial out

> 12Hr/24Hr >

/ Add /

and

keys