Amplicomms M24 Manuale di avvio rapido

Sfoglia online o scarica il pdf Manuale di avvio rapido per Telefono cellulare Amplicomms M24. Amplicomms M24 2.

Amplicomms M24 Manuale di avvio rapido
M24
Quick user guide
INTRODUCTION
M24 is Amplicomms new 2G clamshell mobile phone with 2.4
inches display, offering an amplified handsfree base.
M24 is a CARE PHONE with features :
• Loud speaker
• Talking dialing digits
• Easy-charging base with built-in Bluetooth handsfree system
• Talking caller ID name
• 10 Photo speed dial
• SOS button
• Smart Care features
• Hearing Aid Compatible (M4/T4)
A- PHONE DESCRIPTION
1
2
13
14
3
10
4
5
11
6
12
7
8
9
1 - Earpiece
9 - Microphone
2 - Display
10 - Right selection key
3 - Left selection key
11 - End / Power key
4 - Navigation key
12 - Torch key
5 - Answer/Call key
(Long press (3s) to
6 - Photo memory Key
activate/desactivate)
7 - Camera Key
13 - Camera lens
8 - Dialing keypad
14 - Torch/External LED
**
is the hot key for switching the keypad input
between ABC, Abc, abc & 123.
(Long Press # will activate / deactivate the Silent mode)
**
is the hot key for entering special symbol.
15
16
20
17
15 - Loudspeaker
18 - Headset jack
16 - SOS key
19 - Micro-USB socket
17 - Charging contacts
20 - Volume control
(Hearing, Ringer)
External LED
Flashing Red - Battery low
Flashing White - Incoming call
Flashing Green - Message / Missed call
Color Display
Vibrate then Ring
Vibrate only
Silence
Red – Ring; Green –
Ring & Vibrate
Base or headset
connected
B- BASE DESCRIPTION
1
2
6
Note! All the diagrams are for illustrative purposes. It may be
slightly different from the actual unit.
In keeping with our environmental preservation and
1
compliance commitment, we include Quick Start Guide in our
packaging. For digital copy and other useful information,
please visit our website or contact our Helpline.
www.amplicomms.com
GET STARTED
Installing the SIM card, memory card and
battery
ATTENTION :
Risk of swallowing small objects! The SIM card & memory
card can be removed. Small children can swallow them.
Do not bend or scratch the SIM card. Prevent any contact
with water, dirt or electrical charges.
• Turn off the phone and disconnect the charger before
removing the battery cover.
-
Remove the battery cover:
- Insert the Nano SIM card (mandatory) and the
microSD memory card (optional, not supplied):
1) Slide the small metal part to the left side to unlock it.
2) With the finger nail, lift it up softly to the left side
3) Place the SIM card in the SIM card holder with the golden
contacts facing down and the cut corner at the upper right
(drawing A)
4) Close the SIM card metal part and lock it by sliding softly to
the right (drawing B)
18
19
*To expand the internal storage memory, you can insert a
microSD memory card (maximum capacity of 32 GB / not
included). Insert the memory card into the slot until it stops as
illustrated.
- Insert the battery:
Battery power
Signal strength
-
Insert the battery into battery compartment with golden
contacts of the battery facing downwards to the right of the
phone. Press lightly on the top end of the battery until it
Roaming
snaps into place.
-
Replace and secure the battery cover until it clicks into
Bluetooth ON
place.
Bluetooth
connection
7
1 - Contact pins (for handsfree and
charging)
2 - Phone button
(Press to answer or end calls when
the phone is on the base)
3 - Volume - key
4 - Volume + key
5 - Pairing button
5
6 - Status LED (steady blue when
phone is BT connected)
4
7 - USB connector
3
A
B
Charge the phone
A
B
OR
- Connect the USB plug of the adaptor to the charging socket
(A) or place the device in the cradle (B or C)
- When placed on the cradle, your phone will connect
with the base via Bluetooth (Base LED steady blue). You
can use the phone menus and make, answer, continue or
terminate calls in handsfree mode or listen to the radio on
the base loudspeaker.
(**A valid Bluetooth pairing between M24 and the base is
required; your system has been paired at the factory. In case
of need, see "PAIRING M24 WITH THE BASE")
ATTENTION:
• Only use battery, charger and accessories that have been
approved for using with this particular model. Connecting
other accessories may be dangerous and may invalidate the
warranty.
• When charging the battery for the first time, it should be
charged for at least 4 hours.
• When using the base, make sure phone orientation is
matching figures B or C
1st USE SETUP
-
Long press
to power up the phone
You may be requested to enter your Sim card PIN code
(4 digits) provided by your operator.
-
to select the desired language > OK
-
Input HH:MM >
> DD/MM/YYYY >
> Save
( Press Menu >
> Settings > Phone > ..... User can
modify the detailed settings )
Make a Call
-
Enter the number 0.....9 ( Press Clear to delete )
-
Press
to dial ( Press H-Free for Handsfree. Press H-Held
for Handset )
-
Press
to end the call
-
To desactivate/activate the talking keypad: Menu /
Settings / 1. Profiles / General / 2. Customize / 7. Keypad
ADD Phonebook contact
First contact:
Press Menu /
/ Phonebook /
/ 2. Normal / Options /
Name, input ABC.../
/ Number 012... / Options / Save
Then for additional contact:
Press Menu /
/ Phonebook /
/ 2. Normal /
Options / Name, input ABC.../
/ Number 012... / Options /
Save
Call from phonebook
-
Press
>
to select the 10 photo memories;
or
Press Names >
to select the number
-
Press
to dial
-
Press
to end the call
Receive a Call
-
Flip up the phone or press
to answer
-
Press
to end the call
-
When the phone is on the base (base LED steady
blue) you can use
base key to answer
and end the call in handsfree mode. You can also control
the base loudspeaker volume with
Settings ( Ring tone & Volume )
-
Press Menu >
> Settings >....
-
Under the Settings menu, the following options can also
be accessed
1. Profiles
2. Phone ( Setting Date/Time, Languages,.... )
3. Charger LED ( Activate / Deactivate )
4. Tone Control
5. Call settings
6. Security (password : 1122)
7. Restore (password : 1122)
( Press Menu >
> Settings > Profiles > General >
Customize..... User can select the Ring tone, Volume and
others )
CALL Log
-
Press Menu >
> Call Log >.....
1. Missed
2. Dialled
3. Received
-
Press
to select the desired number
-
Press
to dial out
C
> 12Hr/24Hr >
/ Add /
and
keys