Amplicomms M24 Manuale di avvio rapido - Pagina 2

Sfoglia online o scarica il pdf Manuale di avvio rapido per Telefono cellulare Amplicomms M24. Amplicomms M24 2.

Stampa la pagina

Write/Send Messages ( SMS )

Press Menu >

> Messages > Write

Input the text messages

is the hot key for switching the keypad input

between ABC, Abc, abc & 123.

is the hot key for entering special symbol.

Press Options > Send to >

> Enter number or Add

from phonebook > enter the recipient phone number > OK >

Options > Send

Under the Messages menu, the following options can also

be accessed

1. Write

2. Inbox

3. Drafts

4. Outbox

5. Sent

6. Setting

Read new messages

Press View >

to select message

Press View to read

Press Options to Reply / Forward / Delete

Read old messages

Press Menu

Press OK

Select Inbox

Take a Photo

Press

> press again

to take a photo.....

( Press Menu >

> Multimedia > Gallery.... User can

review the photos )

Multimedia

Press Menu >

> Multimedia >.....

1. Camera

2. Gallery

3. Play Audio

4. Recorder

5. FM Radio

UNIQUE FEATURES HIGHTLIGHT

SOS Assistance button

Long press

for 3 seconds to dial out assistance

number

Follow the voice message, the recipient of the assistance

call can press

to accept the call. M24 will enter the

handsfree mode automatically

If the call was not accepted, M24 will keep dialing out

until the call is accepted

To terminate, press and hold

SOS mode Setting :

Press Menu >

> SOS Settings > 1. SOS Mode Setting

1. SOS numbers ( SOS button to call 5 Emergency

numbers )

2. Service center (SOS button to call Service center

number if available )

3. OFF ( SOS button is deactivated )

Press OK to select

SOS number Setting :

Press Menu >

> SOS Settings > 2. SOS Number

Select the numbers ( 5 Max ). Options or Edit can be

selected

1. Add From Phonebook

2. Add From Photo phonebook

3. Enter number

Press Done or OK to save

Service Center number setting :

Press Menu >

> SOS Settings > 3. Service Center

Enter the number and press Done

Voice Message :

Press Menu >

> SOS Settings > 4. Voice message

1. Default > Select – Default voice message announced to

the recipient of the assistance call

2. Custom > Select – User recorded voice message

announced to the recipient of the assistance call

ATTENTION :

• Remember to set the SOS numbers and inform all the

recipients.

• To have SOS function working normally, the network

service must be active.

Talking Dialing Digits

While pressing the numeric buttons, M24 will announce

the corresponding number.

( Press Menu > Settings > Profiles > General > Customize >

Keypad..... User can select Talking dialing digits, Silence or

Key tone. )

Talking Caller ID Name

User can record a name/message associated to the PHOTO

phonebook contacts. When the incoming caller number

matches the phone number in the photo phonebook , the

corresponding recorded name/message will be announced

instead of the normal ring melody.

( Press

> View > Edit > Caller ringtone >.....

User can delete the recorded message to restore the normal

ringtone)

PHOTO Phonebook

Press

to select the 10 photo memories

( maximum )

Press

to dial out

ADD PHOTO Phonebook contact

Press

> Add.... ( Or, View > Edit..... for current

contacts )

1. Picture >

> Save ( To take a new photo )

2. Contact > input the name and number> Save

3. Caller ringtone > Record > record the name/voice

message > Stop > Play ( to check )

When these 10 contacts is calling in, the associated voice

message will be announced. If no voice message is recorded,

the phone will ring with normal ringtone.

TORCH

Make a long press

to turn ON/OFF

SMART TOOLS

Intelligent Ringer

In order not to miss a call, the ringer loudness will

automatically set to maximum when the same phone number

calls the second time within 3 minutes after the initial missed

call.

After the call is answered, the ringer loudness will be

resumed to the user selected volume level.

( Press Menu >

> i.Ringer..... User can switch this feature

ON/OFF )

Smart Notification

SMS will be sent to the Helper ( Mobile phone number )

for MISSED CALL or BATTERY LOW of your phone.

Helper mobile phone number can be set under the same

Smart Tools menu.

( Press Menu >

> s.Notices..... )

Smart Care

SMS will be sent to the Helper ( Mobile phone number )

for LACK of PHONE CALL ACTIVITIES or LACK of PHYSICAL

ACTIVITIES ( key detect, open/close of the phone, charging

detection ).

Helper mobile phone number can be set under the same

Smart Tools menu.

( Press Menu >

> Smart Care..... )

Helper

Remember to set Helper mobile phone number for SMS

alert notification .

( Press Menu >

> Helper..... )

Remark : Sending SMS may require additional cost!

PAIRING M24 WITH THE BASE

Go to Menu > Network > Bluetooth

If Bluetooth is OFF, press ON softkey to activate

Go down to Pairing and press OK > OK to start searching

Press and hold the base pairing button (5 in Fig. B)

Once M24 completes the scanning process, select M24

Smart Base from the device list and press Pair softkey.

Release Pairing button.

Place M24 on the base. Status LED should turn steady

blue.

TECHNICAL DATA

Network bands (MHz) / Maximum power (dBm):

- GSM 2G: 850/ 33, 900/ 33, 1800/30, 1900/ 30

- Bluetooth: 2400 – 2483.5 / 2

SAR values (Max), GSM 900 Mhz -Head: 0.04 W/kg - Body: 0.88 W/Kg

- Limb: 1.52 W/Kg

DCS 1800 -Head: 0.02 W/Kg - Body: 0.32 W/kg

- Limb: 1.96 W/Kg

Battery - Li-Ion, 3.7 V, 800 mAh

Talk time - up to 5 hours

Standby time - up to 7 days

Dimensions - approx. 107 x 56 x 20 mm (closed)

approx. 200 x 56 x 12 mm (open)

USB connection - Micro USB

Headset connection - 3.5 mm jack, 4-conductor

(TRRS) phone connector

PROBLEMS AND SOLUTIONS

Problems

Solutions

The mobile phone cannot be

No battery inserted;

switched on

Battery is not charged.

The phone is requesting a PUK when

If you do not have the PUK for your

I switch on the phone

SIM card, please contact your service

provider.

No signal quality is displayed

No network connection. The mobile

phone is in a location where there is

no network service, please move to

a different location or contact your

service provider

A message appears in the display for

Some functions can only be used

some functions, indicating execution/

after the respective service has been

use is not possible

applied for. Contact your service

provider.

Screen frozen or no response when

Remove the battery for 3 minutes

pressing keys

and try again

No connection to the mobile

Contact your service provider

telecommunication network

The "Insert SIM" message appears in

Ensure that the SIM card has been

the display

installed correctly. Contact your

service provider.

The battery cannot be charged or is

Battery is defective;

empty within a short time

Place the phone correctly in the

charging unit or connect the

charging unit properly;

Clean the charging contact of the

mobile phone and charging unit with

a dry soft cloth;

Charge the mobile phone for 4

hours.

The mobile phone has accidentally

Switch off the phone immediately,

got wet

remove the battery and allow

the unit to dry completely before

powering it on again.

you cannot send any SMS

Press MENU > Network > SIM

solution

Setting...

( If you do not have the APN for your

SIM card, please contact your service

provider )

TIPS ON THE BATTERY

• Only use batteries, cables and charging unit approved by the manufacturer, otherwise the

battery could be damaged.

• Do not short circuit the battery. Always leave the battery in the phone to avoid accidentally

short circuiting the battery contacts.

• Keep the battery contacts clean and free of dirt.

• The battery can be charged/discharged hundreds of times but its service life is limited.

Replace the battery when the battery power has decreased noticeably.

NETWORK SERVICES AND COSTS

M24 is designed for use when connected to a mobile phone network. Using network services

and SMS may result in traffic costs.

AREA OF USE

• Do not use the phone in prohibited areas.

• Switch the phone off without affecting nearby medical equipment (e.g. in hospitals).

• Do not use the phone in petrol stations or near fuels and chemicals.

SAFETY

• Prevent exposure to smoke, dust, vibration, chemicals, moisture, heat and direct sunlight.

• The phone is not waterproof, please keep it dry.

• Only use original accessories and battery. Never attempt to connect other

products.

• Never attempt to connect incompatible products.

• Repairs to this device must be completed by qualified service personnel.

• Keep the phone and accessories out of the reach of children.

• The SIM card can be removed. Caution! Small children can swallow them.

• The ringing tone is issued via the loudspeaker. Take an incoming call first and then hold the

phone to your ear. This prevents any possible hearing damage.

• Use approved handsfree equipment and appropriate holder while driving. It is essential to

observe the applicable national laws and regulations.

• Always maintain a distance of at least 15 cm to implanted heart pacemakers to prevent

interference. Do not carry the phone in a chest pocket when switched on. Always hold the

phone to the ear furthest away from the pacemaker during calls. Switch the phone off

immediately if you notice or suspect any adverse effects. Consult your doctor if you have any

question.

• This phone is hearing aid compatible. If you wear a hearing aid, please contact your doctor

or the hearing aid manufacturer to inquire about any possible impairments through mobile

communication equipment.

• Do not rely on the mobile phone as a safeguard for emergencies. For a variety of technical

reasons, it is not possible to guarantee a reliable connection under all circumstances.

• Ensure access to the power adapter plug is not obstructed by furniture or such.

ENVIRONMENT

This symbol means that your inoperative electronic appliance must be collected

separately and not mixed with the household waste. The European Union has

implemented a specific collection and recycling system for which producers are

responsible

Help us protect the environment in which we live!

DECLARATION OF CONFORMITY

The logo printed on the products indicates the conformity with all essential requirements

( RED directive : 2014/53/EU ). You can download the Declaration of Conformity from our

website - www.amplicomms.com - Download/DoC

WARRANTY

Please read carefully the user guide included in this box. M24 is an approved equipment in

accordance with the European regulations, attested by the CE marking. The product you just

bought is a technological product, it must be handled with care.

Note: You have a legal warranty on this product in accordance with the regulations

applicable to the sale of consumer goods in the country in which you made this purchase.

For any information regarding this legal warranty, please contact your dealer. Without

prejudice to the legal guarantee of the products, ATLINKS guarantees that the product in

this box conforms to its technical specifications contained in the user guide included in the

this box, and this during a warranty period, counted from the date of purchase of the new

product, the date on your invoice or ticket checkout where is indicated the name of your

reseller, and equal to: Twenty four (24) months for the telephone, excluding consumables,

accessories and batteries. For any claim under this warranty during the warranty period,

you must return the entire Product to your dealer, together with the proof of purchase,

the invoice or receipt issued by your dealer, indicating the place of purchase and the serial

number of the Product, following the appearance or discovery of the defect. ATLINKS

undertakes to repair any defective item due to a defect in design, material or workmanship,

at its expense, or to replace, at its expense, by an identical or at least equivalent element

in terms of functionalities and performance. If the repair or replacement is impossible

under normal commercial conditions, the Product will be refunded or replaced by a Product

equivalent. Within the maximum limit allowed by the applicable law, the product or

element replacement, which may be new or reconditioned, is warranted during a period of

ninety (90) days from the date of repair or until the end date of the initial warranty period,

whichever is the earlier greater than ninety (90) days, it being specified that any period of

immobilization of the Product of at least seven (7) days will be added to the warranty period

remaining to run. This warranty does not apply in the following cases:

- Installation or use not in accordance with the instructions in the guide of the user,

- Incorrect connection or abnormal use of the Product, especially with non-compatible

accessories, as indicated in the user guide,

- Product opened, modified or replaced by means of non-approved parts, serial number

deleted, illegible, damaged,

- Normal wear, including normal wear and tear on accessories, batteries and displays,

- Failure to comply with the technical and safety standards in force in the area geographical

use,

- Product having suffered a shock or a fall,

- Product damaged by lightning, electrical surge, heat source or radiation, water damage,

exposure to conditions of temperature, humidity or other excessive ambient conditions or

any other cause external to the product,

- Negligence or faulty maintenance,

- An intervention, a modification or a repair carried out by a not authorized by ATLINKS.

If the returned Product is not covered by the warranty, you will receive a quote from repair

that will mention the cost of analysis and transportation costs that you will be charged if

you want the Product returned to you. This guarantee is valid in the country in which you

regularly purchased the Product, provided that the country is a member of the European

Union. Subject to the legal provisions in force, all warranties other than described herein are

expressly excluded.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,

A) THIS WARRANTY IS EXCLUSIVE TO ALL OTHER WARRANTIES EXPRESS OR IMPLIED,

INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE PARTICULAR;

B) ATLINKS DISCLAIMS LIABILITY FOR LOSS OR DETERIORATION OF DATA, LOSS OF USE LOST

TO WIN, LOSS OF CHANCE, DEREVENUES OR INCOME, LOSS OF OPERATION, DAMAGES

INDIRECT, CONSEQUENTIAL, CONSEQUENTIAL OR INCIDENTAL;

OR UNINTENTIONAL FAULT AND EXCEPT DAMAGE BODY

The Manufacturer reserves the right to modify the specifications of its products in

order to make technical improvements or comply with new regulations.

AMPLICOMMS and ATLINKS are registered trademarks.

Atlinks Europe

147 Ave Paul Doumer

92500 Rueil-Malmaison France

RCS Nanterre 508 823 747

www.amplicomms.com

Model : Amplicomms M24

A/W No. : 10002363 Rev.1 (EN)

Printed in China