Amplicomms M24 Посібник із швидкого старту - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Мобільний телефон Amplicomms M24. Amplicomms M24 2 сторінки.
Друкувати сторінку
Write/Send Messages ( SMS )
-
Press Menu >
> Messages > Write
-
Input the text messages
**
is the hot key for switching the keypad input
between ABC, Abc, abc & 123.
**
is the hot key for entering special symbol.
-
Press Options > Send to >
> Enter number or Add
from phonebook > enter the recipient phone number > OK >
Options > Send
-
Under the Messages menu, the following options can also
be accessed
1. Write
2. Inbox
3. Drafts
4. Outbox
5. Sent
6. Setting
Read new messages
-
Press View >
to select message
-
Press View to read
-
Press Options to Reply / Forward / Delete
Read old messages
-
Press Menu
-
Press OK
-
Select Inbox
Take a Photo
-
Press
> press again
to take a photo.....
( Press Menu >
> Multimedia > Gallery.... User can
review the photos )
Multimedia
-
Press Menu >
> Multimedia >.....
1. Camera
2. Gallery
3. Play Audio
4. Recorder
5. FM Radio
UNIQUE FEATURES HIGHTLIGHT
SOS Assistance button
-
Long press
for 3 seconds to dial out assistance
number
-
Follow the voice message, the recipient of the assistance
0
call can press
to accept the call. M24 will enter the
handsfree mode automatically
-
If the call was not accepted, M24 will keep dialing out
until the call is accepted
-
To terminate, press and hold
SOS mode Setting :
-
Press Menu >
> SOS Settings > 1. SOS Mode Setting
1. SOS numbers ( SOS button to call 5 Emergency
numbers )
2. Service center (SOS button to call Service center
number if available )
3. OFF ( SOS button is deactivated )
-
Press OK to select
SOS number Setting :
-
Press Menu >
> SOS Settings > 2. SOS Number
-
Select the numbers ( 5 Max ). Options or Edit can be
selected
1. Add From Phonebook
2. Add From Photo phonebook
3. Enter number
-
Press Done or OK to save
Service Center number setting :
-
Press Menu >
> SOS Settings > 3. Service Center
-
Enter the number and press Done
Voice Message :
-
Press Menu >
> SOS Settings > 4. Voice message
1. Default > Select – Default voice message announced to
the recipient of the assistance call
2. Custom > Select – User recorded voice message
announced to the recipient of the assistance call
ATTENTION :
• Remember to set the SOS numbers and inform all the
recipients.
• To have SOS function working normally, the network
service must be active.
Talking Dialing Digits
-
While pressing the numeric buttons, M24 will announce
the corresponding number.
( Press Menu > Settings > Profiles > General > Customize >
Keypad..... User can select Talking dialing digits, Silence or
Key tone. )
Talking Caller ID Name
-
User can record a name/message associated to the PHOTO
phonebook contacts. When the incoming caller number
matches the phone number in the photo phonebook , the
corresponding recorded name/message will be announced
instead of the normal ring melody.
( Press
>
> View > Edit > Caller ringtone >.....
User can delete the recorded message to restore the normal
ringtone)
PHOTO Phonebook
-
Press
>
to select the 10 photo memories
( maximum )
-
Press
to dial out
ADD PHOTO Phonebook contact
-
Press
>
> Add.... ( Or, View > Edit..... for current
contacts )
1. Picture >
> Save ( To take a new photo )
2. Contact > input the name and number> Save
3. Caller ringtone > Record > record the name/voice
message > Stop > Play ( to check )
-
When these 10 contacts is calling in, the associated voice
message will be announced. If no voice message is recorded,
the phone will ring with normal ringtone.
TORCH
-
Make a long press
to turn ON/OFF
SMART TOOLS
Intelligent Ringer
-
In order not to miss a call, the ringer loudness will
automatically set to maximum when the same phone number
calls the second time within 3 minutes after the initial missed
call.
-
After the call is answered, the ringer loudness will be
resumed to the user selected volume level.
( Press Menu >
> i.Ringer..... User can switch this feature
ON/OFF )
Smart Notification
-
SMS will be sent to the Helper ( Mobile phone number )
for MISSED CALL or BATTERY LOW of your phone.
-
Helper mobile phone number can be set under the same
Smart Tools menu.
( Press Menu >
> s.Notices..... )
Smart Care
-
SMS will be sent to the Helper ( Mobile phone number )
for LACK of PHONE CALL ACTIVITIES or LACK of PHYSICAL
ACTIVITIES ( key detect, open/close of the phone, charging
detection ).
-
Helper mobile phone number can be set under the same
Smart Tools menu.
( Press Menu >
> Smart Care..... )
Helper
-
Remember to set Helper mobile phone number for SMS
alert notification .
( Press Menu >
> Helper..... )
Remark : Sending SMS may require additional cost!
PAIRING M24 WITH THE BASE
-
Go to Menu > Network > Bluetooth
-
If Bluetooth is OFF, press ON softkey to activate
-
Go down to Pairing and press OK > OK to start searching
-
Press and hold the base pairing button (5 in Fig. B)
-
Once M24 completes the scanning process, select M24
Smart Base from the device list and press Pair softkey.
Release Pairing button.
-
Place M24 on the base. Status LED should turn steady
blue.
TECHNICAL DATA
Network bands (MHz) / Maximum power (dBm):
- GSM 2G: 850/ 33, 900/ 33, 1800/30, 1900/ 30
- Bluetooth: 2400 – 2483.5 / 2
SAR values (Max), GSM 900 Mhz -Head: 0.04 W/kg - Body: 0.88 W/Kg
- Limb: 1.52 W/Kg
DCS 1800 -Head: 0.02 W/Kg - Body: 0.32 W/kg
- Limb: 1.96 W/Kg
Battery - Li-Ion, 3.7 V, 800 mAh
Talk time - up to 5 hours
Standby time - up to 7 days
Dimensions - approx. 107 x 56 x 20 mm (closed)
approx. 200 x 56 x 12 mm (open)
USB connection - Micro USB
Headset connection - 3.5 mm jack, 4-conductor
(TRRS) phone connector
PROBLEMS AND SOLUTIONS
Problems
Solutions
The mobile phone cannot be
No battery inserted;
switched on
Battery is not charged.
The phone is requesting a PUK when
If you do not have the PUK for your
I switch on the phone
SIM card, please contact your service
provider.
No signal quality is displayed
No network connection. The mobile
phone is in a location where there is
no network service, please move to
a different location or contact your
service provider
A message appears in the display for
Some functions can only be used
some functions, indicating execution/
after the respective service has been
use is not possible
applied for. Contact your service
provider.
Screen frozen or no response when
Remove the battery for 3 minutes
pressing keys
and try again
No connection to the mobile
Contact your service provider
telecommunication network
The "Insert SIM" message appears in
Ensure that the SIM card has been
the display
installed correctly. Contact your
service provider.
The battery cannot be charged or is
Battery is defective;
empty within a short time
Place the phone correctly in the
charging unit or connect the
charging unit properly;
Clean the charging contact of the
mobile phone and charging unit with
a dry soft cloth;
Charge the mobile phone for 4
hours.
The mobile phone has accidentally
Switch off the phone immediately,
got wet
remove the battery and allow
the unit to dry completely before
powering it on again.
you cannot send any SMS
Press MENU > Network > SIM
solution
Setting...
( If you do not have the APN for your
SIM card, please contact your service
provider )
TIPS ON THE BATTERY
• Only use batteries, cables and charging unit approved by the manufacturer, otherwise the
battery could be damaged.
• Do not short circuit the battery. Always leave the battery in the phone to avoid accidentally
short circuiting the battery contacts.
• Keep the battery contacts clean and free of dirt.
• The battery can be charged/discharged hundreds of times but its service life is limited.
Replace the battery when the battery power has decreased noticeably.
NETWORK SERVICES AND COSTS
M24 is designed for use when connected to a mobile phone network. Using network services
and SMS may result in traffic costs.
AREA OF USE
• Do not use the phone in prohibited areas.
• Switch the phone off without affecting nearby medical equipment (e.g. in hospitals).
• Do not use the phone in petrol stations or near fuels and chemicals.
SAFETY
• Prevent exposure to smoke, dust, vibration, chemicals, moisture, heat and direct sunlight.
• The phone is not waterproof, please keep it dry.
• Only use original accessories and battery. Never attempt to connect other
products.
• Never attempt to connect incompatible products.
• Repairs to this device must be completed by qualified service personnel.
• Keep the phone and accessories out of the reach of children.
• The SIM card can be removed. Caution! Small children can swallow them.
• The ringing tone is issued via the loudspeaker. Take an incoming call first and then hold the
phone to your ear. This prevents any possible hearing damage.
• Use approved handsfree equipment and appropriate holder while driving. It is essential to
observe the applicable national laws and regulations.
• Always maintain a distance of at least 15 cm to implanted heart pacemakers to prevent
interference. Do not carry the phone in a chest pocket when switched on. Always hold the
phone to the ear furthest away from the pacemaker during calls. Switch the phone off
immediately if you notice or suspect any adverse effects. Consult your doctor if you have any
question.
• This phone is hearing aid compatible. If you wear a hearing aid, please contact your doctor
or the hearing aid manufacturer to inquire about any possible impairments through mobile
communication equipment.
• Do not rely on the mobile phone as a safeguard for emergencies. For a variety of technical
reasons, it is not possible to guarantee a reliable connection under all circumstances.
• Ensure access to the power adapter plug is not obstructed by furniture or such.
ENVIRONMENT
This symbol means that your inoperative electronic appliance must be collected
separately and not mixed with the household waste. The European Union has
implemented a specific collection and recycling system for which producers are
responsible
Help us protect the environment in which we live!
DECLARATION OF CONFORMITY
The logo printed on the products indicates the conformity with all essential requirements
( RED directive : 2014/53/EU ). You can download the Declaration of Conformity from our
website - www.amplicomms.com - Download/DoC
WARRANTY
Please read carefully the user guide included in this box. M24 is an approved equipment in
accordance with the European regulations, attested by the CE marking. The product you just
bought is a technological product, it must be handled with care.
Note: You have a legal warranty on this product in accordance with the regulations
applicable to the sale of consumer goods in the country in which you made this purchase.
For any information regarding this legal warranty, please contact your dealer. Without
prejudice to the legal guarantee of the products, ATLINKS guarantees that the product in
this box conforms to its technical specifications contained in the user guide included in the
this box, and this during a warranty period, counted from the date of purchase of the new
product, the date on your invoice or ticket checkout where is indicated the name of your
reseller, and equal to: Twenty four (24) months for the telephone, excluding consumables,
accessories and batteries. For any claim under this warranty during the warranty period,
you must return the entire Product to your dealer, together with the proof of purchase,
the invoice or receipt issued by your dealer, indicating the place of purchase and the serial
number of the Product, following the appearance or discovery of the defect. ATLINKS
undertakes to repair any defective item due to a defect in design, material or workmanship,
at its expense, or to replace, at its expense, by an identical or at least equivalent element
in terms of functionalities and performance. If the repair or replacement is impossible
under normal commercial conditions, the Product will be refunded or replaced by a Product
equivalent. Within the maximum limit allowed by the applicable law, the product or
element replacement, which may be new or reconditioned, is warranted during a period of
ninety (90) days from the date of repair or until the end date of the initial warranty period,
whichever is the earlier greater than ninety (90) days, it being specified that any period of
immobilization of the Product of at least seven (7) days will be added to the warranty period
remaining to run. This warranty does not apply in the following cases:
- Installation or use not in accordance with the instructions in the guide of the user,
- Incorrect connection or abnormal use of the Product, especially with non-compatible
accessories, as indicated in the user guide,
- Product opened, modified or replaced by means of non-approved parts, serial number
deleted, illegible, damaged,
- Normal wear, including normal wear and tear on accessories, batteries and displays,
- Failure to comply with the technical and safety standards in force in the area geographical
use,
- Product having suffered a shock or a fall,
- Product damaged by lightning, electrical surge, heat source or radiation, water damage,
exposure to conditions of temperature, humidity or other excessive ambient conditions or
any other cause external to the product,
- Negligence or faulty maintenance,
- An intervention, a modification or a repair carried out by a not authorized by ATLINKS.
If the returned Product is not covered by the warranty, you will receive a quote from repair
that will mention the cost of analysis and transportation costs that you will be charged if
you want the Product returned to you. This guarantee is valid in the country in which you
regularly purchased the Product, provided that the country is a member of the European
Union. Subject to the legal provisions in force, all warranties other than described herein are
expressly excluded.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
A) THIS WARRANTY IS EXCLUSIVE TO ALL OTHER WARRANTIES EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE PARTICULAR;
B) ATLINKS DISCLAIMS LIABILITY FOR LOSS OR DETERIORATION OF DATA, LOSS OF USE LOST
TO WIN, LOSS OF CHANCE, DEREVENUES OR INCOME, LOSS OF OPERATION, DAMAGES
INDIRECT, CONSEQUENTIAL, CONSEQUENTIAL OR INCIDENTAL;
(C) ATLINKS LIABILITY IS LIMITED TO THE VALUE OF PURCHASE OF PRODUCT EXCEPT HEAVIL
OR UNINTENTIONAL FAULT AND EXCEPT DAMAGE BODY
The Manufacturer reserves the right to modify the specifications of its products in
order to make technical improvements or comply with new regulations.
©Copyright ATLINKS 2020 - Reproduction prohibited
AMPLICOMMS and ATLINKS are registered trademarks.
Atlinks Europe
147 Ave Paul Doumer
92500 Rueil-Malmaison France
RCS Nanterre 508 823 747
www.amplicomms.com
Model : Amplicomms M24
A/W No. : 10002363 Rev.1 (EN)
Printed in China