Caraudio-Systems VL2-MBN2 Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Handbuch für Zubehör für Kraftfahrzeuge Caraudio-Systems VL2-MBN2 herunter. Caraudio-Systems VL2-MBN2 10 Seiten. Video-inserter

Seite drucken
Caraudio-Systems VL2-MBN2 Handbuch

2. Installation

Switch off ignition and disconnect the vehicle's battery! The interface needs a permanent
12V source. If according to factory rules disconnecting the battery is to be avoided, it is
usually sufficient to put the vehicle is sleep-mode. In case the sleep-mode does not show
success, disconnect the battery with a resistor lead.
If power source is not taken directly from the battery, the connection has to be checked
for being start-up proven and permanent.
2.1.
Installationsort
The interface is installed on the backside of the monitor panel. Therefore, the head-unit
must be removed.
Remove head-unit.
Remove the upper cover including the DVD/
navigation device. The external daughter PCB
is plugged in between the flex cable of the
monitor panel and the mainboard of the head-unit.
Version 18.12.2013
VL2-MBN2