Caraudio-Systems VL2-MBN2 매뉴얼 - 페이지 5

{카테고리_이름} Caraudio-Systems VL2-MBN2에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Caraudio-Systems VL2-MBN2 10 페이지. Video-inserter

2. Installation

Switch off ignition and disconnect the vehicle's battery! The interface needs a permanent

12V source. If according to factory rules disconnecting the battery is to be avoided, it is

usually sufficient to put the vehicle is sleep-mode. In case the sleep-mode does not show

success, disconnect the battery with a resistor lead.

If power source is not taken directly from the battery, the connection has to be checked

for being start-up proven and permanent.

2.1.

Installationsort

The interface is installed on the backside of the monitor panel. Therefore, the head-unit

must be removed.

Remove head-unit.

Remove the upper cover including the DVD/

navigation device. The external daughter PCB

is plugged in between the flex cable of the

monitor panel and the mainboard of the head-unit.

Version 18.12.2013

VL2-MBN2