Caraudio-Systems VL2-MBN2 매뉴얼 - 페이지 4
{카테고리_이름} Caraudio-Systems VL2-MBN2에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Caraudio-Systems VL2-MBN2 10 페이지. Video-inserter
페이지 인쇄
1.2.
Checking the compatibility of vehicle and accessories
Requirements
Vehicle
Navigation/radio
Limitations
Video only
TV-System
1.3.
Dip-switch settings
With the video interface boxes dip-switches it is possible to dis- or enable the interfaces
inputs (dip 1 to 3) and to preselect the type of camera which is
(to be) installed (dip 5).
Dip position down is ON and position up is OFF.
1.3.1. Enabling the interface's video inputs (dip 1-3)
Only the enabled video inputs can be accessed when switching through the video sources. It
is recommended to enable only the required inputs for the disabled will be skipped when
switching through the video interfaces inputs.
Dip
Dip 1
Dip 2
Dip 3
1.3.2. Rear-view camera settings (dip 5)
Depending on whether no camera, after-market camera or
factory camera shall be used, dip 5 must use different settings.
If set to OFF, the interface switches to factory LVDS picture
when the reverse gear is engaged to display factory rear-view
camera or factory PDC picture.
Version 18.12.2013
Mercedes Benz
Comand APS NTG1 and NTG2 navigation system
The interface inserts ONLY video into the infotainment,
for sound use the FM-modulator, the AUX-In interface AUX-110
or factory AUX which can be coded by dealership.
Compatible usually with NTSC. PAL if factory TV is installed.
Video-input
ON (down)
RGB
enabled
Video IN1
enabled
Video IN2
enabled
OFF (up)
disabled
disabled
disabled
Rear-view
camera type
None
Factory
After-market
Dip 5
OFF
OFF
ON
VL2-MBN2