Caraudio-Systems VL2-MBN2 매뉴얼 - 페이지 6

{카테고리_이름} Caraudio-Systems VL2-MBN2에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Caraudio-Systems VL2-MBN2 10 페이지. Video-inserter

2.2.

Connecting the flex cables

A rotated and a normal 30pin flex cable are included in delivery. Depending on the

orientation of the flex cable connectors at the monitor panel and at the mainboard the

rotated or the normal flex cable have to be installed.

Connect the flex cable from the mainboard to J_IN of the external daughter PCB and the flex

cable from the monitor panel to J_OUT of the external daughter PCB.

from the mainboard

from the monitor panel

Electrical the contacts have to be transmitted similar, in other words the left contact of the

monitor panel have to be connected with the left contact of the mainboard. Please take note

of the contact surfaces of the flex cables during installation.

Note: Depending on the navigation the original flex cable possibly needs to be changed into

a flex cable in delivery.

Version 18.12.2013

VL2-MBN2