AmpliVox AirVox S690 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Lautsprechersystem AmpliVox AirVox S690 herunter. AmpliVox AirVox S690 12 Seiten. Battery powered pa system with bluetooth

Seite drucken

WIRELESS HANDHELD MICROPHONE—MODEL SW695 con't

Microphone Operation and Status Display

Functions

1) Interchangeable Microphone

Head

2) LCD Screen

3) Power / Mute Control Switch

4) Select Button

5) Microphone Input Sensitivity

Adjustment—is used to set the

gain of microphone. If you are a

soft talking speaker you will need

to turn the control counter clock-

wise. Turn clockwise if you are a

loud talker. Use plastic screwdriv-

er that is supplied.

BATTERY COVER REMOVED

BLUETOOTH MODULE

•

Turn power switch

turn Bluetooth pairing on and hold for 4 seconds to

enter into the pairing mode.

•

The RED LED

Bluetooth signal. Search function will stay active for

10 minutes. If no signal is found, this function will shut

off. During the search function turn on your Bluetooth

device for pairing. On your Bluetooth menu of your

device, choose AmpliVox, AmpliVox S1500 or use pin

code 0000. Once paired, red LED will stay on.

•

Use this button

to play previous song. Use

When paused you will need to press again to start

playing.

•

VOLUME CONTROL

the Bluetooth material.

•

NOTE: Always turn off Bluetooth power before turning

main power off. If you turn off main power first, you

will need to cycle thru a power off/on the next time

you use the Bluetooth module.

on, press

button to

will start to flash, searching for a

to move to the next song or

to pause.

Use to adjust the volume of

• TURN ON MICROPHONE: Press and hold

the "POWER/MUTE" (3) button until LCD

screen lights up.

• TO MUTE: Press "POWER/MUTE" button

once to MUTE. Channel number will flash

when muted. Press button again once to

remove "MUTE".

• TURN OFF MICROPHONE: Press and hold

the "POWER/MUTE" (3) button for 2 sec-

onds to turn microphone "OFF".

• SELECT CHANNEL (Manual): Press and

hold the "SELECT" (4) button for 2 seconds

until you only see the word Channel and

channel number. To change channel, when

flashing, press the "SELECT" (4) button

until you reach the desired channel. Flash-

ing will stop after 10 seconds and channel is

now set.

• LOCK / UNLOCK CHANNEL: Press the

"POWER/MUTE" (3) button and "SELECT"

button at the same time to lock or unlock

channel. When locked, channel cannot be

changed. "LOCKED" symbol appears in up-

per left-hand corner.