DPI INTELLIPHASE POWER 12-13D020T Series Gebrauchsanweisung - Seite 4

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Medienkonverter DPI INTELLIPHASE POWER 12-13D020T Series herunter. DPI INTELLIPHASE POWER 12-13D020T Series 12 Seiten. Dc-dc converters

Seite drucken

4.5. NEVER smoke or allow a spark or flame in vicinity of battery.

4.6. Be extra cautious not to drop a metal tool onto battery. It might spark or short

circuit battery or other electrical part that may cause an explosion.

4.7. Remove personal metal items such as rings, necklaces, watches, etc. Batteries

can produce a short circuit current high enough to weld such items causing a

severe burn.

5. INSTALLATION

WARNING:

between battery interconnects such as those that connect one

battery to the next because it will cause the battery pack to

become unbalanced and dangerous to use. Always connect DC-

DC Converter across the entire Battery Pack – refer to

'Correct / Incorrect Wiring Diagram Drawing'.

5.1. Installation should be performed by a Qualified Electrical Technician trained

and certified to work with Automotive and Mobile Equipment or vehicles.

5.2. Description of Wire Colors and Connection if supplied with Wire Leads

5.2.1. Input Wires:

Blue:

Yellow:

White:

5.2.2. Output Wires:

Red:

Black:

5.3. If supplied with Connector, refer to Wire Diagram Drawings.

5.4. Refer to the Mount Drill Templates Section for drill-hole diameters. Mount

surface MUST be clean of all grease, grime and all debris. Use of a thermal

transfer compound is recommended – apply a thin layer to the mounting area

prior to laying the Converter into place. Figure-A Mounting Voids Warranty.

NEVER connect loads to connection points in-

Battery Positive

Battery Negative

Ignition Key – if tied (shorted) to Battery Positive, Converter

output will energize (ON). If left floating, or shorted to

Battery Negative, Converter output will de-energize (OFF).

+13Vdc Output Load Positive

- Negative Load Return