DPI INTELLIPHASE POWER 12-13D020T Series Інструкція з експлуатації - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Конвертер мультимедіа DPI INTELLIPHASE POWER 12-13D020T Series. DPI INTELLIPHASE POWER 12-13D020T Series 12 сторінок. Dc-dc converters
Друкувати сторінку4.5. NEVER smoke or allow a spark or flame in vicinity of battery.
4.6. Be extra cautious not to drop a metal tool onto battery. It might spark or short
circuit battery or other electrical part that may cause an explosion.
4.7. Remove personal metal items such as rings, necklaces, watches, etc. Batteries
can produce a short circuit current high enough to weld such items causing a
severe burn.
5. INSTALLATION
WARNING:
between battery interconnects such as those that connect one
battery to the next because it will cause the battery pack to
become unbalanced and dangerous to use. Always connect DC-
DC Converter across the entire Battery Pack – refer to
'Correct / Incorrect Wiring Diagram Drawing'.
5.1. Installation should be performed by a Qualified Electrical Technician trained
and certified to work with Automotive and Mobile Equipment or vehicles.
5.2. Description of Wire Colors and Connection if supplied with Wire Leads
5.2.1. Input Wires:
Blue:
Yellow:
White:
5.2.2. Output Wires:
Red:
Black:
5.3. If supplied with Connector, refer to Wire Diagram Drawings.
5.4. Refer to the Mount Drill Templates Section for drill-hole diameters. Mount
surface MUST be clean of all grease, grime and all debris. Use of a thermal
transfer compound is recommended – apply a thin layer to the mounting area
prior to laying the Converter into place. Figure-A Mounting Voids Warranty.
NEVER connect loads to connection points in-
Battery Positive
Battery Negative
Ignition Key – if tied (shorted) to Battery Positive, Converter
output will energize (ON). If left floating, or shorted to
Battery Negative, Converter output will de-energize (OFF).
+13Vdc Output Load Positive
- Negative Load Return
4