Cardax Prox Mifare Series Hinweis zur Installation - Seite 12

Blättern Sie online oder laden Sie pdf Hinweis zur Installation für Kartenleser Cardax Prox Mifare Series herunter. Cardax Prox Mifare Series 19 Seiten. Teardrop
Auch für Cardax Prox Mifare Series: Hinweis zur Installation (13 seiten)

Seite drucken

Note:

If you are installing the Prox Mifare Series (Teardrop) reader to control a

turnstile you should consult the turnstile manufacturer for details of the locking

mechanism used.

Push-Button Exit

If the door has a push button exit, ensure the URI Exit terminal has the push-

button fitted and correctly terminated with a 10 k resistor before you power

on.

Check Software Version

You should check the URI software version to ensure it is correct for your

installation. The software version number is written on the label of the EPROM

mounted at the bottom right of the URI processor board.

URI software versions that are compatible with the Prox Mifare Series

(Teardrop) reader are shown below:

vW3.61 to vW3.67 or vW6.xx

vW4.74 to vW4.81 or vW9.xx

Note: * These software versions will have one of the following suffixes:

GT = 2 wire modem connection

G = 4 wire modem connection

// = direct connection via comms lines ie. no modem

Software

series *

vW7.xx TC series

series *

Reader Type

One door Cardax Prox or Swipe Readers

URI Special Options

Two door Cardax Prox or Swipe Readers

Part number 3E1100 R12

June 2007