Cardax Prox Mifare Series 설치 참고 사항 - 페이지 12

{카테고리_이름} Cardax Prox Mifare Series에 대한 설치 참고 사항을 온라인으로 검색하거나 PDF를 다운로드하세요. Cardax Prox Mifare Series 19 페이지. Teardrop
Cardax Prox Mifare Series에 대해서도 마찬가지입니다: 설치 참고 사항 (13 페이지)

페이지 인쇄

Note:

If you are installing the Prox Mifare Series (Teardrop) reader to control a

turnstile you should consult the turnstile manufacturer for details of the locking

mechanism used.

Push-Button Exit

If the door has a push button exit, ensure the URI Exit terminal has the push-

button fitted and correctly terminated with a 10 k resistor before you power

on.

Check Software Version

You should check the URI software version to ensure it is correct for your

installation. The software version number is written on the label of the EPROM

mounted at the bottom right of the URI processor board.

URI software versions that are compatible with the Prox Mifare Series

(Teardrop) reader are shown below:

vW3.61 to vW3.67 or vW6.xx

vW4.74 to vW4.81 or vW9.xx

Note: * These software versions will have one of the following suffixes:

GT = 2 wire modem connection

G = 4 wire modem connection

// = direct connection via comms lines ie. no modem

Software

series *

vW7.xx TC series

series *

Reader Type

One door Cardax Prox or Swipe Readers

URI Special Options

Two door Cardax Prox or Swipe Readers

Part number 3E1100 R12

June 2007