Electrolux # Handbuch für Gebrauch und Pflege - Seite 9

LOCATIONS OF THE BURNERS

The 30" cooktop is equipped with different sized burners.

The surface burners are located on the cooktop as follows (See

Figure):

- a 5 000 BTU (natural gas) burner located at the right rear position;

- a 18 000 BTU (natural gas) burner located at the center rear

position;

- two 9 500 BTU (natural gas) burners located at the left positions;

- and a 12 000 BTU (natural gas) burner located at the right front

position.

For the 18 000 BTU burner:

Place the burner head over the gas oriﬁce (Figure 1). Be careful not to damage the electrode

while placing the burner head over the oriﬁce. Make sure electrode ﬁts correctly into slot

in burner head.

For all burners:

Place a burner cap on each burner head (see

Figure 2), matching the cap size to the head

size. The cap for each burner has an inner

locating ring which centers the cap correctly

on the burner head. Be sure that all the burner

caps and burner heads are correctly placed

BEFORE using your appliance.

Make sure each burner cap is properly aligned

and level.

Turn the burner on to determine if it will light.

If the burner does not light, contact a Service

Center. Do not service the sealed burner

yourself.

Surface Cooking

Burner Cap

Burner

Head

Gas

opening

Figure 1

30" cooktop

Burner

Cap

Burner

Head

Figure 2