AirStage ABYA014GTEH Installationshandbuch - Seite 3
Blättern Sie online oder laden Sie pdf Installationshandbuch für Klimagerät AirStage ABYA014GTEH herunter. AirStage ABYA014GTEH 15 Seiten.
2.3. Accessories
For installation purposes, be sure to use the parts supplied by the manufacturer or
other prescribed parts. The use of non-prescribed parts can cause serious accidents
such as the unit falling, water leakage, electric shock, or fi re.
The following installation parts are furnished. Use them as required.
Keep the Installation Manual in a safe place and do not discard any other accessories
until the installation work has been completed.
Name and Shape
Operating Manual
Installation Manual
Cover plate (Left)
Cover plate (Right)
Tapping screw
(M4 × 10mm)
Installation template
Bracket (Left)
Bracket (Right)
Special nut
Wall bracket
Tapping screw
(M4 × 20mm)
Coupler heat insulation
Cable tie (Large)
Cable tie (Medium)
WARNING
Q'ty
Application
1
(This book)
1
1
1
2
For positioning the indoor unit
For under ceiling type
1
For suspending the indoor unit from
ceiling
1
1
4
For suspending the indoor unit on the
wall
2
For fi xing the wall bracket
6
For indoor side pipe joint
2
For fi xing the coupler heat insulation
4
For power supply, transmission and
remote controller cable binding
2
Name and Shape
Drain hose
Hose Band
Drain hose insulation
VT wire
Insulation (Pipe)
Silencer pipe
2.4. Optional parts
Description
Model No.
Auxiliary pipe
9374714025
UTY-XWZXZC
UTY-XWZXZB
External connect kit
UTY-XWZXZD
UTY-XWZXZ7
UTY-XWZXZE
Wireless LAN adapter
UTY-TFSXZ*
External power supply
UTZ-GXXA
unit
3. INSTALLATION WORK
Correct initial installation location is important because it is diffi cult to move unit after it is
installed.
3.1. Selecting an installation location
Decide the mounting position together with the customer as follows.
Select installation locations that can properly support the weight of the indoor unit.
Install the units securely so that they do not topple or fall.
Do not install the indoor unit in the following areas:
• Area with high salt content, such as at the seaside. It will deteriorate metal parts,
causing the parts to fail or the unit to leak water.
• Area fi lled with mineral oil or containing a large amount of splashed oil or steam,
such as a kitchen. It will deteriorate plastic parts, causing the parts to fail or the unit
to leak water.
• Area that generates substances that adversely affect the equipment, such as
sulfuric gas, chlorine gas, acid, or alkali. It will cause the copper pipes and brazed
joints to corrode, which can cause refrigerant leakage.
• Area that can cause combustible gas to leak, contains suspended carbon fi bers or
fl ammable dust, or volatile infl ammables such as paint thinner or gasoline. If gas
leaks and settles around the unit, it can cause a fi re.
• Area where animals may urinate on the unit or ammonia may be generated.
Do not use the unit for special purposes, such as storing food, raising animals,
growing plants, or preserving precision devices or art objects.
It can degrade the quality of the preserved or stored objects.
Do not install where there is the danger of combustible gas leakage.
Q'ty
Application
For installing drain pipe
VP25 (O.D.32, I.D.25)
1
For installing drain hose
1
Adhesive type
(100 × 220 mm)
1
For fi xing the drain hose L 280 mm
1
Adhesive type
(160 × 110 mm)
1
Connect the silencer pipe to the small
(liquid) pipe.
1
Application
For indoor side pipe joint
(For AB24)
For output function
(Output terminal / CNB01)
For control input function
(Apply voltage terminal / CNA01)
For control input function
(Dry contact terminal / CNA02)
For forced thermostat off function
(Apply voltage terminal / CNA03)
For forced thermostat off function
(Dry contact terminal / CNA04)
For wireless LAN control.
Supply power to the indoor unit PCB when
the indoor unit is turned off to prevent errors.
WARNING
CAUTION
En-2