AirStage ABYA014GTEH Panduan Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pendingin Udara AirStage ABYA014GTEH. AirStage ABYA014GTEH 15 halaman.

Halaman Cetak

2.3. Accessories

For installation purposes, be sure to use the parts supplied by the manufacturer or

other prescribed parts. The use of non-prescribed parts can cause serious accidents

such as the unit falling, water leakage, electric shock, or ﬁ re.

The following installation parts are furnished. Use them as required.

Keep the Installation Manual in a safe place and do not discard any other accessories

until the installation work has been completed.

Name and Shape

Operating Manual

Installation Manual

Cover plate (Left)

Cover plate (Right)

Tapping screw

(M4 × 10mm)

Installation template

Bracket (Left)

Bracket (Right)

Special nut

Wall bracket

Tapping screw

(M4 × 20mm)

Coupler heat insulation

Cable tie (Large)

Cable tie (Medium)

WARNING

Q'ty

Application

(This book)

For positioning the indoor unit

For under ceiling type

For suspending the indoor unit from

ceiling

For suspending the indoor unit on the

wall

For ﬁ xing the wall bracket

For indoor side pipe joint

For ﬁ xing the coupler heat insulation

For power supply, transmission and

remote controller cable binding

Name and Shape

Drain hose

Hose Band

Drain hose insulation

VT wire

Insulation (Pipe)

Silencer pipe

2.4. Optional parts

Description

Model No.

Auxiliary pipe

9374714025

UTY-XWZXZC

UTY-XWZXZB

External connect kit

UTY-XWZXZD

UTY-XWZXZ7

UTY-XWZXZE

Wireless LAN adapter

UTY-TFSXZ*

External power supply

UTZ-GXXA

unit

3. INSTALLATION WORK

Correct initial installation location is important because it is difﬁ cult to move unit after it is

installed.

3.1. Selecting an installation location

Decide the mounting position together with the customer as follows.

Select installation locations that can properly support the weight of the indoor unit.

Install the units securely so that they do not topple or fall.

Do not install the indoor unit in the following areas:

• Area with high salt content, such as at the seaside. It will deteriorate metal parts,

causing the parts to fail or the unit to leak water.

• Area ﬁ lled with mineral oil or containing a large amount of splashed oil or steam,

such as a kitchen. It will deteriorate plastic parts, causing the parts to fail or the unit

to leak water.

• Area that generates substances that adversely affect the equipment, such as

sulfuric gas, chlorine gas, acid, or alkali. It will cause the copper pipes and brazed

joints to corrode, which can cause refrigerant leakage.

• Area that can cause combustible gas to leak, contains suspended carbon ﬁ bers or

ﬂ ammable dust, or volatile inﬂ ammables such as paint thinner or gasoline. If gas

leaks and settles around the unit, it can cause a ﬁ re.

• Area where animals may urinate on the unit or ammonia may be generated.

Do not use the unit for special purposes, such as storing food, raising animals,

growing plants, or preserving precision devices or art objects.

It can degrade the quality of the preserved or stored objects.

Do not install where there is the danger of combustible gas leakage.

Q'ty

Application

For installing drain pipe

VP25 (O.D.32, I.D.25)

For installing drain hose

Adhesive type

(100 × 220 mm)

For ﬁ xing the drain hose L 280 mm

Adhesive type

(160 × 110 mm)

Connect the silencer pipe to the small

(liquid) pipe.

Application

For indoor side pipe joint

(For AB24)

For output function

(Output terminal / CNB01)

For control input function

(Apply voltage terminal / CNA01)

For control input function

(Dry contact terminal / CNA02)

For forced thermostat off function

(Apply voltage terminal / CNA03)

For forced thermostat off function

(Dry contact terminal / CNA04)

For wireless LAN control.

Supply power to the indoor unit PCB when

the indoor unit is turned off to prevent errors.

WARNING

CAUTION

En-2