Draper 65839 Anleitung Handbuch - Seite 8

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Säge Draper 65839 herunter. Draper 65839 20 Seiten. 10"

Seite drucken

ASSEMBLY

NOTE:

To correctly assemble and adjust this table saw,

Fig.2.

✪✌

please read the following instructions carefully.

✫✌

When this saw is first removed from it's

packaging, the blade guard and riving knife

assembly must be fitted.

When making any adjustment on the saw, ensure

✬✌

the power supply is turned off and the plug has

been removed from the socket.

FITTING THE BLADE GUARD (FIG.2):

Turn the saw over so the underside is easily

accessible. Remove the four nuts and bolts

securing the protection vent plate to access the

underside of the work table. Pass the riving knife

part ✪✌ of the guard assembly through the slot

✫✌ in the work table and secure it in place with

the two bolts ✬✌.

ADJUSTING THE RIVING KNIFE (FIG.3):

Fig.3.

Set the blade to the full height adjustment and

ensure that it is in the 0º position (see page 9)

before adjusting the knife.

NOTE:

3mm

The riving knife must be adjusted 3mm (Max.

5mm) from the blade cutting tips. This adjustment

is made on the two securing bolts and the

elongated holes in the bracket from underneath.

When set securely, tighten the bolts. This setting

must be checked regularly.

This table saw must be securely fastened to the

proper stand (Draper Stock No.65840) or to

another appropriate supporting surface.

If choosing the Draper stand, refer to the

instructions enclosed with the stand for all

mounting procedures

If mounting to a work bench, allow sufficient

space around the machine for long/wide material

to be cut without interference. Also that cuts can

be made without awkward positions, leading to

possible user injury. For example,having to lean

over the saw blade to retrieve the off cuts.

- 7 -