Draper 02520 Handbuch - Seite 16

Blättern Sie online oder laden Sie pdf Handbuch für Schleifer Draper 02520 herunter. Draper 02520 20 Seiten. 230v router
Auch für Draper 02520: Handbuch (20 seiten)

Seite drucken

BASIC ROUTER OPERATIONS

9.6

PIVOT ROD TRAMMEL – FIG. 11

− Remove one of the 2 rods (17.2) from the

parallel fence guide (17).

− Loosen the parallel fence guide locking screw

(9) from the front channel.

− Insert the rod into the rod channel.

− Loosen the trammel wing nut (20.1) and slide

the trammel (20) on to the end of the rod.

− Adjust the point height to suit before locking the

trammel wing nut (20.1).

− Adjust the distance between the router bit and

pivot point by sliding the rod to suit the

diameter of the circle/hole required.

− Tighten the parallel fence guide locking knob to

secure.

9.7

CURVED EDGE GUIDE

(02520 only) – FIGS. 12 – 14

An optional attachment that attaches to the parallel

fence guide, the curved edge guide (18) can be

used to follow shaped contours of timber.

− Remove the black guards (17.1) from the

parallel guide fence (17) by removing the 4

screws holding them in place.

− Retaining 2 of the above screws, use them to

secure the curved edge guide (18) to the

parallel fence guide (Fig.13).

− When cutting, ride the guide wheel along the

contour of the workpiece to make the cut

(Fig.14).

Note: It's essential that the guide wheel of the

curved edge guide is kept free of dust and swarf to

enable it to freely rotate. Use a suitable lubricant, if

required.

FIG.

(18)

(17.1)

FIG.

– 16 –

(9)

(20.1)

(17.2)

(20)

(17)