Draper 02520 Manuel - Page 16
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Draper 02520. Draper 02520 20 pages. 230v router
Également pour Draper 02520 : Manuel (20 pages)
9.
BASIC ROUTER OPERATIONS
9.6
PIVOT ROD TRAMMEL – FIG. 11
− Remove one of the 2 rods (17.2) from the
parallel fence guide (17).
− Loosen the parallel fence guide locking screw
(9) from the front channel.
− Insert the rod into the rod channel.
− Loosen the trammel wing nut (20.1) and slide
the trammel (20) on to the end of the rod.
− Adjust the point height to suit before locking the
trammel wing nut (20.1).
− Adjust the distance between the router bit and
pivot point by sliding the rod to suit the
diameter of the circle/hole required.
− Tighten the parallel fence guide locking knob to
secure.
9.7
CURVED EDGE GUIDE
(02520 only) – FIGS. 12 – 14
An optional attachment that attaches to the parallel
fence guide, the curved edge guide (18) can be
used to follow shaped contours of timber.
− Remove the black guards (17.1) from the
parallel guide fence (17) by removing the 4
screws holding them in place.
− Retaining 2 of the above screws, use them to
secure the curved edge guide (18) to the
parallel fence guide (Fig.13).
− When cutting, ride the guide wheel along the
contour of the workpiece to make the cut
(Fig.14).
Note: It's essential that the guide wheel of the
curved edge guide is kept free of dust and swarf to
enable it to freely rotate. Use a suitable lubricant, if
required.
FIG.
11
(18)
(17.1)
FIG.
12
FIG.
13
FIG.
14
– 16 –
(9)
(20.1)
(17.2)
(20)
(17)