Electrolux AUCI Handbuch - Seite 12

Blättern Sie online oder laden Sie pdf Handbuch für Geschirrspüler Electrolux AUCI herunter. Electrolux AUCI 16 Seiten. Undercounter dishwasher
Auch für Electrolux AUCI: Handbuch für Installation, Betrieb und Wartung (20 seiten)

Electrolux AUCI Handbuch
At the end of the wash, the dishwasher emits a
series of beeps and "END" blinks on the display:
Open the door and remove the rack containing the
clean dishes.
WARNING
The appliance will not remove burnt food deposits
from dishes. Dishes with burnt-on food deposits
should be cleaned mechanically/chemically (for
example, pre-wash under running water) before
putting them in the dishwasher.
WARNING
The use of "foaming"/non-specific detergents or in
any case detergents used in different ways from that
prescribed by the manufacturer, can cause damage
to the dishwasher and compromise washing results.
WARNING
Failure to remove the residuals of detergent possi-
bly used for manual prewash can cause malfunc-
tioning of the dishwasher and compromise
washing results.
Change the water in the tank at least twice a day.
Type of racks and loading
Figure 18
YELLOW rack: for 18 plates with maximum diame-
ter of 240 mm.
Figure 19
GREEN rack: for 12 bowls with maximum diameter
of 240 mm.
Figure 20
14
END
BLUE rack for glasses: the glasses should be pla-
ced upside down.
Figure 21
YELLOW container for cutlery: insert items, with the
handles pointing downwards, in each container.
Available as accessories: dividers for glasses and
rack for dishes with maximum diameter of 320 mm.
Note: if only one type of dish rack is to be used, it is
advisable to choose the GREEN rack.
C4
END OF WORK AND DAILY CLEANING
The appliance is designed to carry out an automatic
cleaning cycle to help flush out any residues and to
guarantee greater health and hygiene:
Open the door and take out the rack containing the
clean dishes.
Remove the tank filters and the overflow "W".
W
Figure 22
Close the door.
Select the drain cycle by pressing button "B"
(Figure 17).
The message "CLE" ("CLEAN") will be displayed
throughout the drain cycle:
After a few minutes, 3 beeps indicate the end of the
cleaning cycle and "END" blinks on the display:
Switch off the dishwasher by pressing button "A"
(Figure 17).
CLE
END