Formech 450 Installations-, Betriebs- und Wartungshandbuch - Seite 11
Blättern Sie online oder laden Sie pdf Installations-, Betriebs- und Wartungshandbuch für Heizgerät Formech 450 herunter. Formech 450 14 Seiten. Single heater vacuum forming machine
Seite druckenWarranty
Formech 450
Reliability and a long service life are synonymous with the Formech brand. However, as with
any machinery, certain parts will require periodic replacement.
The silicon seals applied to the mould table and to the top aperture of the machine (clamp)
are seen as being consumable parts, their service life will depend on how the machine is
treated and how often it is used.
The table and clamp seals are not covered by our warranty.
Heating elements
The infrared heating elements supplied with this machine are manufactured from a ceramic
material and are very brittle. A shock to the machine may break an element.
The heating elements contain a length of resistance wire internally, which becomes extremely
hot when electricity is applied. The wire expands and contracts as it heats and cools.
Eventually, due to the continual expansion and contraction, the wire will fracture and a new
element will be needed. This may take a decade or more. Alternatively it could happen as a
result of an impact or shock. Because of this we are unable to apply our standard warranty to
ceramic heating elements.
The heating elements are not covered by our warranty.
Vacuum system
The vacuum system on this machine is fairly simple but uses high quality components
throughout. The life expectancy of the vacuum system will be compromised by the ingress of
dirt, shavings, dust, liquid etc.
THE VACUUM CIRCUIT INCLUDING THE VACUUM PUMP WILL NOT BE COVERED BY
OUR WARRANTY IF THEY ARE FOUND TO BE BLOCKED WITH FOREIGN MATTER OR
CORRODED BY THE INGRESS OF LIQUID.
11