Formech 450 설치, 운영 및 서비스 매뉴얼 - 페이지 11

{카테고리_이름} Formech 450에 대한 설치, 운영 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Formech 450 14 페이지. Single heater vacuum forming machine

Warranty

Formech 450

Reliability and a long service life are synonymous with the Formech brand. However, as with

any machinery, certain parts will require periodic replacement.

The silicon seals applied to the mould table and to the top aperture of the machine (clamp)

are seen as being consumable parts, their service life will depend on how the machine is

treated and how often it is used.

The table and clamp seals are not covered by our warranty.

The infrared heating elements supplied with this machine are manufactured from a ceramic

material and are very brittle. A shock to the machine may break an element.

The heating elements contain a length of resistance wire internally, which becomes extremely

hot when electricity is applied. The wire expands and contracts as it heats and cools.

Eventually, due to the continual expansion and contraction, the wire will fracture and a new

element will be needed. This may take a decade or more. Alternatively it could happen as a

result of an impact or shock. Because of this we are unable to apply our standard warranty to

ceramic heating elements.

The heating elements are not covered by our warranty.

The vacuum system on this machine is fairly simple but uses high quality components

throughout. The life expectancy of the vacuum system will be compromised by the ingress of

dirt, shavings, dust, liquid etc.

THE VACUUM CIRCUIT INCLUDING THE VACUUM PUMP WILL NOT BE COVERED BY

OUR WARRANTY IF THEY ARE FOUND TO BE BLOCKED WITH FOREIGN MATTER OR

CORRODED BY THE INGRESS OF LIQUID.