AND UA-767PC Gebrauchsanweisung - Seite 7

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Blutdruckmessgerät AND UA-767PC herunter. AND UA-767PC 17 Seiten. Digital blood pressure monitor

Seite drucken

Preparation for Measurements

1. Installing / Changing the Batteries

Remove the battery cover and insert

new batteries into the battery

compartment as shown, taking care to

observe the proper direction for each

battery. Use R6P, LR6 or similar type

batteries.

If the symbol

are depleted. Always change all batteries at the same time. If you do not

intend to use the device for longer periods, remove the batteries. Only use

high quality, leakproof batteries with the specified ratings. Never mix new and

old batteries or batteries from different manufactures.

Note: Used equipment, parts, batteries do not fall within the category

of household waste, and must be disposed of according to the

applicable regulations.

2. Connecting the Air Hose

Insert the air connector plug into the air socket firmly.

3. Attaching the Arm Cuff

Wrap the cuff around the upper arm

about 2-3 cm (1 inch) above the elbow

as shown. Place the cuff directly against

the skin, as clothing may cause a faint

heart beat, and result in an error.

Constriction of the upper arm caused by

rolling up a shirt sleeve may prevent

accurate readings.

4. Posture While Measuring

Remain seated in a comfortable position,

placing the center of the upper arm at the

same height as your heart.

5. Measurement

During the measurement, the cuff will

become very tight. Do not be alarmed as this is normal.

6. After the Measurement

After the measurement, remove the cuff and record your data.

appears on the display panel, this means that the batteries

2-3 cm (1 inch)

Left arm

Hose

Excessive

constriction