CommScope Argus CV3PX Installationsanleitung Handbuch - Seite 4
Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Antenna CommScope Argus CV3PX herunter. CommScope Argus CV3PX 7 Seiten. 353mm (13.9”) profile panel antennas
Seite drucken
Instruction Manual, 353mm (13.9") Profile Panel Antennas
Figure 4: Typical Example of Upper Bracket Placement for Various Downtilts
Operation of Antennas
Fixed Downtilt
Antennas
Manual
Electrically
Adjustable
Downtilt
Antennas
AISG Compliant
RET Antennas
OPTIONAL: THE TILT ARM AND EXTRA HARDWARE
CAN BE STOWED IN THE POSITION SHOWN WHEN IN
0° DOWNTILT CONFIGURATION
BRACKET.
The beam downtilt is factory set.
The beam downtilt below the horizon is adjusted over the available
range (typically 0° to 10°) by rotating the hex socket located at the
bottom of the antenna - Figure 5).
clockwise direction increases the beam downtilt below the horizon.
Turning the hex socket in an anti-clockwise direction decreases the
beam downtilt below the horizon.
below boresight can be read off the scale at the base of the antenna.
The downtilt setting is read from the face of the antenna bottom end cap
at the point where the scale protrudes.
AISG Compliant antennas are compatible with AISG compliant control
unit equipment, such as Argus' CTXD-60-H portable handheld AISG
controller. For operation of downtilt using AISG compliant controllers
see the controller documentation. Where manual override of RET
control is provided at the antenna bottom end cap, operation is identical
to that described above for MET antennas.
WARNING: During downtilt adjustment ensure the hex socket is not
turned past the minimum and maximum positions as shown on the
downtilt indicator scale. Forcing the hex adjustment beyond this point
may lead to damage of the downtilt mechanism. Using power drills
and electric screwdrivers to adjust downtilt may also lead to
damage of the downtilt mechanism.
Bulletin A997-0083Revision F February 2014 page 4 of 7
USING A CLAMP
Turning the hex socket in a
Beam downtilt setting in degrees
A