Alentec & Orion NEX-U 23800 Handbuch für Teile und technischen Service - Seite 4

Blättern Sie online oder laden Sie pdf Handbuch für Teile und technischen Service für Controller Alentec & Orion NEX-U 23800 herunter. Alentec & Orion NEX-U 23800 11 Seiten. U-net central processing unit

Seite drucken

INSTALLATION AND CONFIGURATION

For further details about the installation and configuration of the equipment, check the monitoring system "Installer's Guide".

DEVICE ATTACHMENT

Optionally, the device can be fixed by using the assembly holes (2).

RESET OF THE DEVICE

When the device is powered through the DC Jack by using the provided transformer, the POWER LED will light on,

indicating that the equipment is turned on. The equipment is turned off by disconnecting the power supply. To restart

the unit, press the button briefly. The POWER LED will remain on, while the other LEDs will turn off and on sequentially.

CAN BUS END OF LINE RESISTOR CONFIGURATION

Once the equipment is connected, follow the instructions below:

1. To activate the end of line resistor, switch the two switches E.O.L 1 and 2 in the ON position.

2. To deactivate the end of line resistor, switch the two switches E.O.L. 1 and 2 in the OFF position.

LED AND DIAGNOSTIC INDICATORS

LED

DESCRIPTION

POWER

Shows that equipment is connected

STATUS

Shows the operating status of the equipment

If it lights up, it means that the device is correctly

ONLINE

connected.

The light flashes when the device is receiving data

The light flashes when the device is transmitting

data

TECHNICAL FEATURES

POWER SUPPLY

VOLTAGE

2 x CAN BUS 4xUSB, 1 x LAN RJ45,

CONNECTIONS

STATUS LEDS

PESO

105 274 R. 05/23

Alentec & Orion AB Grustagsvägen 4, SE-13840, Älta, SWEDEN · [email protected] · www.alentec.com

5 V DC

1 x HDMI, 1 x USB 3.0

560 g

DIMENSIONS

153 mm (6.02 in)

44 mm

(1.73 in)

102 mm

(4.01)