Advanced Keys AK-104 Installationshandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Installationshandbuch für Fernstart Advanced Keys AK-104 herunter. Advanced Keys AK-104 11 Seiten. Smart keyless entry system

Seite drucken

INSTALLATION

INSTALLATION OVERVIEW

Use following steps as a guide to install this system:

Review product manual

manual. Prepare vehicle

for installation.

Mount LED, secure

controller and close-up

installation.

INSTALLATION NOTES

• For vehicles equipped with factory or aftermarket alarm/remote start, it is

possible to install this system without the anti-theft alarm and remote start

functions. (Refer to User Manual on how to disable Alarm Function) Connect

BATTERY, GROUND, LOCK, UNLOCK, ACC, BRAKE and ANTENNAS for

Smart Keyless Entry function only.

• Ensure the ACC(+) input is connected. It is required for remote-start function

Avoid leaving the Smart Key inside or near the detection range for extended

periods of time, for it will remain in constant communication with the controller

• It is recommended to connect the DOOR SWITCH input to the vehicle. This

system will have a better remote sensing performance when it is aware of the

door status.

PROGRAMMABLE FEATURES

Horn or Siren Mode

unlocking. Horn output will only sound in alarming and programming mode. If the

Unlock

Lock

Remote Start

Review and set

controller jumper

settings according to

requirements.

Verify smart keys and

bypass transponder card

function/range then route

and secure antennas to

final position.

Horn Output

Siren Output

Connect Main and

Accessory Harness.

Pre-position antennas

and antenna wiring.

Power ON the system

and set programmable

features.

Parking Light

2 x

1 x

locking or