Advanced Keys AK-104 Manual de instalación - Página 7
Navegue en línea o descargue pdf Manual de instalación para Arranque a distancia Advanced Keys AK-104. Advanced Keys AK-104 11 páginas. Smart keyless entry system
INSTALLATION
INSTALLATION OVERVIEW
Use following steps as a guide to install this system:
Review product manual
manual. Prepare vehicle
for installation.
Mount LED, secure
controller and close-up
installation.
INSTALLATION NOTES
• For vehicles equipped with factory or aftermarket alarm/remote start, it is
possible to install this system without the anti-theft alarm and remote start
functions. (Refer to User Manual on how to disable Alarm Function) Connect
BATTERY, GROUND, LOCK, UNLOCK, ACC, BRAKE and ANTENNAS for
Smart Keyless Entry function only.
• Ensure the ACC(+) input is connected. It is required for remote-start function
Avoid leaving the Smart Key inside or near the detection range for extended
periods of time, for it will remain in constant communication with the controller
• It is recommended to connect the DOOR SWITCH input to the vehicle. This
system will have a better remote sensing performance when it is aware of the
door status.
PROGRAMMABLE FEATURES
Horn or Siren Mode
unlocking. Horn output will only sound in alarming and programming mode. If the
Unlock
Lock
Remote Start
Review and set
controller jumper
settings according to
requirements.
Verify smart keys and
bypass transponder card
function/range then route
and secure antennas to
final position.
Horn Output
Siren Output
-
-
-
Connect Main and
Accessory Harness.
Pre-position antennas
and antenna wiring.
Power ON the system
and set programmable
features.
Parking Light
2 x
2 x
1 x
1 x
1 x
1 x
© Copyright Advanced Keys Inc. 2011. All Rights Reserved.
locking or
7