ATI Technologies SUM100 Wartungshandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Wartungshandbuch für Verstärken ATI Technologies SUM100 herunter. ATI Technologies SUM100 7 Seiten. Amplifier technologies inc. line/sum/line amplifier operating and maintenance manual sum100

PERFORMANCE SPECIFICATIONS

Gain:
Nominal Levels:
Peak Levels:
Noise 20kHz B.W.:
Harmonic Dist.:
Frequency Resp.:
Crosstalk:
Input Impedance:
Output Impedance:
Dimensions:
Connectors:
Power:
Power Supplies:
WA100-1:
WA100-2:
BBU100-1:
DC100-1:
20602-1:
DESK MOUNT KITS:
21075-501:
Audio Technologies Inc. | 154 Cooper Road #902 | West Berlin, NJ 08091 | Voice 856-719-9900 | Fax 856-719-9903 | www.
28dB maximum, 0dB at 12 o'clock pot position
+4dBu in, +4dBm out to 600 ohm balanced load
+24dBu in, +22 dBm out to 600 ohm balanced load
-90dBm maximum output
.02% Max at Peak Level
20Hz to 20 kHz .005% max at Nominal Level
+.25dB, 20 to 20,000Hz
70dB minimum at 10kHz
Balanced, 40kohm bridging
Balanced, 40 ohms maximum Zs
1.5"H by 5.5"W by 5.75"D; Weight: 1.5 Lb. Net
XLR (balanced input/outputs)
24VDC @ .07A, connector sleeve is positive
All units require 24VDC power supply, which is ordered separately.
Nanoamps can share a single supply-using loop thru DC cable (P/N 20602-1).
Do not exceed rated supply current
Wall mount power supply (UL), 24VDC @ .4 amp, 115 VAC/60 Hz
Tabletop power supply, 24VDC @ .4 amp, 230 VAC/50-60 Hz with IEC 320
male 3 pin AC input connector. User supplies matching AC line cord for local
power system
Battery Pack unit houses four 9V alkaline batteries (batteries not included).
Four-to-six-hour life
DC to DC converter powers several units from 12VDC mobile and belt pack
batteries. Supplies 24VDC @ .2amp maximum
DC power cable assembly for looping the DC power between NanoAmps
20617-501 Angled Desk Mount Base
20617-502 Angled Desk Mount Base and One Stacker (2 units high)
20617-503 Angled Desk Mount Base and Two Stackers (3 units high)
20617-504 Stacker (2 units high)
20617-505 Horizontal joiners for 2 units (side by side)
Rack mount system mounts three units in one rack
audio.com