ATI Technologies SUM100 유지 관리 매뉴얼 - 페이지 7

{카테고리_이름} ATI Technologies SUM100에 대한 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ATI Technologies SUM100 7 페이지. Amplifier technologies inc. line/sum/line amplifier operating and maintenance manual sum100

페이지 인쇄

PERFORMANCE SPECIFICATIONS

Gain:

Nominal Levels:

Peak Levels:

Noise 20kHz B.W.:

Harmonic Dist.:

Frequency Resp.:

Crosstalk:

Input Impedance:

Output Impedance:

Dimensions:

Connectors:

Power:

Power Supplies:

WA100-1:

WA100-2:

BBU100-1:

DC100-1:

20602-1:

DESK MOUNT KITS:

21075-501:

28dB maximum, 0dB at 12 o'clock pot position

+4dBu in, +4dBm out to 600 ohm balanced load

+24dBu in, +22 dBm out to 600 ohm balanced load

-90dBm maximum output

.02% Max at Peak Level

20Hz to 20 kHz .005% max at Nominal Level

+.25dB, 20 to 20,000Hz

70dB minimum at 10kHz

Balanced, 40kohm bridging

Balanced, 40 ohms maximum Zs

1.5"H by 5.5"W by 5.75"D; Weight: 1.5 Lb. Net

XLR (balanced input/outputs)

24VDC @ .07A, connector sleeve is positive

All units require 24VDC power supply, which is ordered separately.

Nanoamps can share a single supply-using loop thru DC cable (P/N 20602-1).

Do not exceed rated supply current

Wall mount power supply (UL), 24VDC @ .4 amp, 115 VAC/60 Hz

Tabletop power supply, 24VDC @ .4 amp, 230 VAC/50-60 Hz with IEC 320

male 3 pin AC input connector. User supplies matching AC line cord for local

power system

Battery Pack unit houses four 9V alkaline batteries (batteries not included).

Four-to-six-hour life

DC to DC converter powers several units from 12VDC mobile and belt pack

batteries. Supplies 24VDC @ .2amp maximum

DC power cable assembly for looping the DC power between NanoAmps

20617-501 Angled Desk Mount Base

20617-502 Angled Desk Mount Base and One Stacker (2 units high)

20617-503 Angled Desk Mount Base and Two Stackers (3 units high)

20617-504 Stacker (2 units high)

20617-505 Horizontal joiners for 2 units (side by side)

Rack mount system mounts three units in one rack

audio.com