ATI Technologies Q46N Handbuch Kommunikation - Seite 6

Blättern Sie online oder laden Sie pdf Handbuch Kommunikation für Messgeräte ATI Technologies Q46N herunter. ATI Technologies Q46N 18 Seiten.

ATI

Q46 Ethernet/IP Communications Manual

1.5

Cable Connection

The cable used for Ethernet/IP communication should meet the CAT5 standard

defined by the Electronic Industries Association and Telecommunications

Industry Association. It is readily available in lengths up to 100 ft. (30 m) with

plugs on each end.

To install an Ethernet cable in the Q46, pass the unterminated cable through the

cable gland nearest the location of the RJ45 connector on the Ethernet/IP option

board. Termination of Cat5/5e/6 cables is very easy and can be completed

quickly with the commonly available RJ45 crimp tool.

While professional results are optimized with the use of the termination tool and

custom cable lengths, patch cord style connection can be completed in some

cases by passing the finished RJ45 connectors through the Q46 cable gland.

The connector will fit through the plastic part of the cable gland, and the rubber

grommet can be slit (some RJ45s may be too big for this.) Once the connector is

inside the enclosure, simply plug it into the jack provided on the Ethernet/IP

communication board. Be sure to adjust the rubber insert in the cable gland so

that the slit is on the bottom and then tighten the gland to seal around the wire.