Andersen 40 ST FS Produkthandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Produkthandbuch für Winden Andersen 40 ST FS herunter. Andersen 40 ST FS 8 Seiten.
Auch für Andersen 40 ST FS: Handbuch (6 seiten), Handbuch (9 seiten)

Seite drucken

GENERAL INFORMATION

Due to the best choice of materials and high precision in manufacturing, we recommend, for

normal use, only to dismantle, clean and lubricate the winch once every second year. Under

extensive use, such as racing, charter or blue water sailing, we recommend to lubricate the

winch once every year.

We strongly recommend always to use ANDERSEN WINCH GREASE, when lubricating your

winch. ANDERSEN WINCH GREASE is a high quality silicone/Teflon grease product.

Most other types of grease, including "marine grease" are not suitable for lubrication of

winches. Non-suitable grease products can cause malfunction, which could result in fatal

injuries for the user and others.

Pawl arm springs should be replaced every second year. Spare arm springs and other parts

that may be required are included in the ANDERSEN Service Kit. Please refer to the service

instruction for the Service Kit suitable for the specific winch.

When the winch handle is not in use but the winch is under load, we recommend, from a

safety point of view, to remove the winch handle from the winch.

To ensure correct function of the self-tailing unit, only use recommended line sizes. When

using the winch with mooring lines DO NOT use the self-tailing function and be sure that the

mooring line is not in contact with the self-tailing arm.

To ensure the best possible functioning of the winch, we recommend that

the winch is placed in accordance with the line entry (shown below).

Be also aware that the self-tailing arm is positioned correctly. We recommend to have the

self-tailing arm positioned within the shaded area (shown above). On this model the self-

tailing arm can be placed in several different positions after having installed the winch.

To identify the Output Drive Gear, insert a winch handle into the winch

and rotate in both directions, the drive gear will only rotate clockwise

in a fast and slow speed.

40ST (V.5.0)

40ST FS (V.5.0.F)

Ideal

rope

entry

Output

drive

gear