Electrolux E32AF75FPS - Icon - Refrigerator Handbuch für Gebrauch und Pflege - Seite 9

Blättern Sie online oder laden Sie pdf Handbuch für Gebrauch und Pflege für Gefrierschrank Electrolux E32AF75FPS - Icon - Refrigerator herunter. Electrolux E32AF75FPS - Icon - Refrigerator 20 Seiten. Professional series
Auch für Electrolux E32AF75FPS - Icon - Refrigerator: Spezifikationen (3 seiten), Handbuch für Gebrauch und Pflege (22 seiten), Stromlaufplan (16 seiten), Spezifikationen (2 seiten), Service-Datenblatt (1 seiten), Handbuch der Abmessungen (5 seiten)

Seite drucken

Electrolux E32AF75FPS - Icon - Refrigerator Handbuch für Gebrauch und Pflege

Door Removal

If door must be removed:

• Unplug the unit

• Gently lay freezer on its back, on a rug or blanket.

• Remove two base screws and base panel. Remove

wire from clips on bottom of cabinet, if required.

• Unplug connector, if required, by holding the cabinet

connector in place and pulling the door connector out.

• Remove the bottom hinge screws.

• Remove the plastic top hinge cover.

• Remove the screws from the top hinge.

• Remove the top hinge from the cabinet.

• Remove the door and bottom hinge from the cabinet.

• To replace door, reverse the above procedures and

securely tighten all screws to prevent hinge slippage.

Ice Maker Installation

If your freezer has an automatic ice maker, please refer to the insert in the bond

pack that came with your freezer (CONNECTING ICE MAKER TO WATER

SUPPLY) to correctly hook-up your ice maker.

SETTING THE TEMPERATURE CONTROLS

Cool Down Period

For safe food storage, allow four (4) hours for freezer to cool

down completely. The freezer will run continuously for the

first several hours.

Electronic Temperature Control

The electronic temperature control is located inside the freezer. Temperature is

factory preset to provide satisfactory food storage temperatures. However, the

temperature control is adjustable to provide a range of temperatures for your

personal satisfaction. To adjust the temperature setting, move the UP ( ) button

for warmer temperature and DOWN ( ) button for colder temperature on the

control panel. Allow several hours for the temperature to stabilize between

adjustments.

Installation