Anderson Hybrid-X Übersicht über die Produktpalette - Seite 2
Blättern Sie online oder laden Sie pdf Übersicht über die Produktpalette für Landwirtschaftliche Geräte Anderson Hybrid-X herunter. Anderson Hybrid-X 5 Seiten.
Seite drucken
Hybrid-X start up
1. Remove the tongue and put it at its storage place (close to the steering wheel under the
left fender);
2. Unlock the front gate;
2
Unlock the front gate;
3. Make sure that the gas tank is full;
4. If the wrapper has the high capacity gas tank, open the valve under the tank and select the
tank with the selector valve (close to the Honda engine);
5. Connect the battery wires;
5
Connect the battery wires;
6. Start the engine with the green button on the control panel (make sure that the ignition
switch is at ON position and pull out the emergency stop button);
7. If necessary, unlock the steering wheels by removing the lock pin close to the wheel (under
the automatic system);
the automatic system);
8. Find out the best wrapping area and put the machine there;
9. With the lifting lever (on the main valve), level the machine to avoid the first bales from
falling;
10 Lower the front gate (with the lever);
10. Lower the front gate (with the lever);
11. Adjust the bale guides enough tight so that the tube has a nice line;
12. For square wrapped bales, raise up the front table rollers (with the handle);
13. For round wrapped bales, let down the front table rollers (with the handle);