Anderson Oper-SRB Betriebshandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Brenner Anderson Oper-SRB herunter. Anderson Oper-SRB 12 Seiten.

Figure 4: Burner air inlet orientation

In order to ensure the accuracy of the orifice plate measurement, the burner air and gas

inlet positions must ensure that there is a straight pipe section of 5 times the pipe

diameter and no other resistance components;

The burner is equipped with a spark plug with cooling air, and the cooling air interface

is a Ø8 connection. It is recommended to use a metal tubing to take the combustion air

from the upstream of the air shut-off valve.

3. Burner operation requirement

The excess air coefficient of this series of burners must be ensured to be above 1.05,

and cannot be running at gas rich mode;

According to the actual situation on site, regularly maintain the burner, check and clean

the burner, recuperator and spark plug;

Regularly check the burning status of the burner, and track the flue gas data of the

burner to avoid damage to the burner due to abnormal combustion

The burner can run at pulse control, with turn down ratio 2:1; while running at

modulation control, the turn down ratio is 3:1.

The working temperature varies by recuperator material, please refer Table 3.

Recuperator Material

Anderson Thermal Soluions（Suzhou）Co. Ltd.

Anderson Thermal Solutions – ANM75 Burner Operation Manual

Table 3 Working temperature

Metal

SiC

Figure 5: Gas inlet orientation

Max. Working temperature(°C)

1150

1300