Dreamline Elegance Installationsanleitung Handbuch - Seite 7

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Sanitärprodukt Dreamline Elegance herunter. Dreamline Elegance 14 Seiten. Shower door

Seite drucken

the hole on the mark. Use the Round head screws ST4.2×25 (27) to attach the Bracket

(29) to the tray or the threshold. Cover the screw location with Decorative cover (28). See

Fig 17 for details. If you use the custom made threshold from the tiles, you need to use

Wall anchor (25).

22. Recheck you have 1/16" - 1/8" gap between the glass door and the Anti-water strip (31).

Then drill holes in Glass profile for glass door (4) through the Wall profile for glass

door (5). Secure the Wall profile for glass door (5) and the Glass profile for glass door

(4) with Flat head screws ST4.2×16 (15). Cover screw locations with Decorative covers

(14). See Fig 18 for details.

23. Refer to Fig 18 to mark the drill holes for the Glass bracket (23). Make sure the marks are

clear and visible. Drill holes on the marks and insert Wall anchors (25). Using Flat head

screws ST4.2×25 (26) to attach the Glass brackets (23) to the wall. Install the Glass

brackets (with nut) (24) onto the Stationary glass (22). Install the two Glass shelves (32)

to the stationary glass. See Fig 19 and Fig 20 for details.

24. Open the glass door. Push the Bottom anti-water strip (11) onto the glass door. Push the

other Anti-water strip (10) into the groove of the Glass profile for glass door (2). See Fig

10 and Fig 11. Close the hole in the bottom pivot retainer with Flat socket head screw

M6×12 (19).

NOTE: You can also attach the pivot retainer to the tray or threshold using Flat head screw

ST4.2×30 (17).

NOTE: If your hardware has Oil Rubbed Bronze finish you will need to cover Bolt (L) with the

Screw cover (9) and the bolt in the Bracket (29) with Screw cover (33). See Fig 12 and 21

for details.

25. Apply silicone sealant between the tray or threshold and the pivot bracket. Apply silicone

sealant over the Screw (17) or (19) to prevent leakage.

26. Apply silicone sealant between the stationary glass and the tray or the threshold.

NOTE: If you need to install the door on the right wall, simply exchange the position of

the wall profile for glass door (1) and the wall profile (5) and turn it upside down.

Rev. 1 .5