Andivi TRC-d Technisches Handbuch - Seite 10

Blättern Sie online oder laden Sie pdf Technisches Handbuch für Thermostat Andivi TRC-d herunter. Andivi TRC-d 19 Seiten.

Andivi – TRC-D – Technical Manual

ENGINEER MODE OPERATION

It is highly recommended for this mode to be operated by trained engineers because it is related to system parameters that will

affect the control results. To operate:

1. Press UP and DOWN buttons for over 5 seconds to enter Engineer mode.

2. Press UP or DOWN button to rotate the menu item and press MODE button to enter the item.

3. Press UP or DOWN button to change the setting and press MODE button to confirm the setting and return to menu item

selection. If no button is pressed for 10 seconds, it will go back to menu item selection. The setting won't be changed then.

4. To leave Engineer mode, rotate till "End" and press MODE button or leave the button intact for 10 seconds.

5. Engineer mode can be locked for the user. In this case, it is not possible to enter this mode with the above procedure. For

safety reasons, entering the Engineer mode is still possible with the UP and DOWN buttons pressed for over 60 seconds.

6. Engineer mode operation flowchart:

Fig. 4-1:

Engineer mode operation

sequence

08/14, fw. ver. V1.2, V1.3

E01

E02

End

E01

Setting

E02

Setting

No button pressed

for 10s under menu

item selection

User

Mode