Dremel DIGILAB 3D40 Schnellstart-Handbuch - Seite 2
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für 3D-Drucker Dremel DIGILAB 3D40 herunter. Dremel DIGILAB 3D40 2 Seiten.
Seite drucken
LEVELING
LEVELING BUILD PLATFORM
1. Tap "Level" on your Dremel 3D40's touch screen.
2. 3D40 will first check the level at the back of the build platform, then move
to the first leveling position.
3. The touchscreen will indicate if your build platform is too high or too low.
a) If the build platform is too high, turn knob to the right until you hear a
"beep". Tap "Verify" to check the bed
level again.
b) If the build platform is too low, turn knob to the left until you hear a
"beep". Tap "Verify" to check the bed level again.
4. Repeat step above for the second levelling position.
5. When the build platform is level, extruder will automatically move to the
calibration position and complete the
levelling process.
BUILDING
BUILDING OUT OF THE BOX
1. On the main screen, tap the "Build" option. Then tap the machine
icon to select from pre-installed models.
2. Tap on the model file you would like to build and tap "Build".
3. Your Dremel 3D40 will align the extruder with the build platform
and will begin heating the extruder.
4. Once the correct temperature is reached, your model will begin to
build.
5. Touch screen will display "Object Finished".
REMOVING YOUR OBJECT FROM THE BUILD
PLATFORM
6. Wait for the extruder to cool before removing your object.
7. With the object still attached, remove build platform from the build
area.
8. Use your hand to peel your object from the build platform. If needed,
gently use the object removal tool to remove object from build
platform.
GET CONNECTED
Wi-Fi
Connect your printer to your wireless network
so you can build from anywhere.
USE YOUR COMPUTER OR
MOBILE DEVICE TO BUILD
FROM ANYWHERE WITH A
WIRELESS CONNECTION.
SET UP WI-FI?
BACK
DREMELDIGILAB.COM
Visit Dremel Digilab to sign up for the newsletter,
and receive Dremel expert customer support.
MAKE YOUR OWN
For info on designing, slicing, and printing
your own models go to...
DremelDigiLab.com/GetStarted
BEST PRACTICES
1.
ALWAYS USE BUILD TAPE.
2. Ensure your platform is level (before you begin building
your object).
3. Ensure spool is installed properly and can rotate freely.
4. When loading filament, allow Dremel 3D40 to extrude until material is
consistent with the installed filament color.
5. It is important to stay near your Dremel 3D40 during operation and watch
the Dremel 3D40 begin building objects. (If a situation occurs, select the
STOP icon right away, to stop any further building).
6. Remove the build platform before removing the object.
7. Use object removal tool gently to avoid damaging the build platform or
object.
English
!
YES
NO
HOME
SIDE 2
!
FILAMENT
LEVEL
1
1
!
BUILD PLATFORM IS TOO HIGH
READY TO VERIFY
BACK
TURN RIGHT TO LOWER
HOME
3
3
!
FILAMENT
LEVEL
1
1
!
ScrewdriverHandle...
FishStencil.g3drem
frog.g3drem
DiamondStencil.g3...
BACK
HOME
2
2
8
REGISTER
FOR WARRANTY
Visit digilab.dremel.com/support to register your 3D40, to ensure proper
documentation of your 1-year warranty.
3D40 RESOURCES
Quick Start Guide
3D40 Website
3D40 Customer
Support
Desktop Slicing
Software
More Details on 3D40
Setup and Maintenance
!
!
BUILD PLATFORM IS TOO LOW
VERIFY
BACK
BACK
HOME
TURN LEFT TO RAISE
HOME
!
FILE NAME
BUILD TIME 00:00
BUILD
DELETE
COPY TO
PRINTER
BACK
HOME
In box and www.dremeldigilab.com/GetStarted
www.dremeldigilab.com
1-844-4DRML3D
(1-844-437-6533)
Installed from www.dremeldigilab.com
or from USB flash drive provided
with the Dremel 3D40
Manual in box and on www.dremeldigilab.com
Part#: 2610039152