- ページ 2

3Dプリンター Dremel DIGILAB 3D40のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Dremel DIGILAB 3D40 2 ページ。

ページを印刷する

LEVELING

LEVELING BUILD PLATFORM

1. Tap "Level" on your Dremel 3D40's touch screen.

2. 3D40 will first check the level at the back of the build platform, then move

to the first leveling position.

3. The touchscreen will indicate if your build platform is too high or too low.

a) If the build platform is too high, turn knob to the right until you hear a

"beep". Tap "Verify" to check the bed

level again.

b) If the build platform is too low, turn knob to the left until you hear a

"beep". Tap "Verify" to check the bed level again.

4. Repeat step above for the second levelling position.

5. When the build platform is level, extruder will automatically move to the

calibration position and complete the

levelling process.

BUILDING

BUILDING OUT OF THE BOX

1. On the main screen, tap the "Build" option. Then tap the machine

icon to select from pre-installed models.

2. Tap on the model file you would like to build and tap "Build".

3. Your Dremel 3D40 will align the extruder with the build platform

and will begin heating the extruder.

4. Once the correct temperature is reached, your model will begin to

build.

5. Touch screen will display "Object Finished".

REMOVING YOUR OBJECT FROM THE BUILD

PLATFORM

6. Wait for the extruder to cool before removing your object.

7. With the object still attached, remove build platform from the build

area.

8. Use your hand to peel your object from the build platform. If needed,

gently use the object removal tool to remove object from build

platform.

GET CONNECTED

Wi-Fi

Connect your printer to your wireless network

so you can build from anywhere.

USE YOUR COMPUTER OR

MOBILE DEVICE TO BUILD

FROM ANYWHERE WITH A

WIRELESS CONNECTION.

SET UP WI-FI?

BACK

DREMELDIGILAB.COM

Visit Dremel Digilab to sign up for the newsletter,

and receive Dremel expert customer support.

MAKE YOUR OWN

For info on designing, slicing, and printing

your own models go to...

DremelDigiLab.com/GetStarted

BEST PRACTICES

ALWAYS USE BUILD TAPE.

2. Ensure your platform is level (before you begin building

your object).

3. Ensure spool is installed properly and can rotate freely.

4. When loading filament, allow Dremel 3D40 to extrude until material is

consistent with the installed filament color.

5. It is important to stay near your Dremel 3D40 during operation and watch

the Dremel 3D40 begin building objects. (If a situation occurs, select the

STOP icon right away, to stop any further building).

6. Remove the build platform before removing the object.

7. Use object removal tool gently to avoid damaging the build platform or

object.

English

YES

HOME

SIDE 2

FILAMENT

LEVEL

BUILD PLATFORM IS TOO HIGH

READY TO VERIFY

BACK

TURN RIGHT TO LOWER

HOME

FILAMENT

LEVEL

ScrewdriverHandle...

FishStencil.g3drem

frog.g3drem

DiamondStencil.g3...

BACK

HOME

FOR WARRANTY

Visit digilab.dremel.com/support to register your 3D40, to ensure proper

documentation of your 1-year warranty.

3D40 RESOURCES

Quick Start Guide

3D40 Website

3D40 Customer

Support

Desktop Slicing

Software

More Details on 3D40

Setup and Maintenance

BUILD PLATFORM IS TOO LOW

VERIFY

BACK

HOME

TURN LEFT TO RAISE

HOME

FILE NAME

BUILD TIME 00:00

BUILD

DELETE

COPY TO

PRINTER

BACK

HOME

In box and www.dremeldigilab.com/GetStarted

www.dremeldigilab.com

1-844-4DRML3D

(1-844-437-6533)

Installed from www.dremeldigilab.com

or from USB flash drive provided

with the Dremel 3D40

Manual in box and on www.dremeldigilab.com

Part#: 2610039152