Dremel MS400 Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Säge Dremel MS400 herunter. Dremel MS400 8 Seiten. Xrp multisaw

Seite drucken

Such preventive safety measures reduce the

risk of starting the tool accidentally.

Store idle tools out of reach of children

and other untrained persons. Tools are

dangerous in the hands of untrained users.

Maintain tools with care. Keep cutting

tools sharp and clean. Properly main-

tained tools, with sharp cutting edges are

less likely to bind and are easier to control.

Any alteration or modification is a misuse

and may result in a dangerous condition.

Check for misalignment or binding of

moving parts, breakage of parts, and any

other condition that may affect the tools

operation. If damaged, have the tool

serviced before using. Many accidents

SAFETY RULES FOR RECIPROCATING SAWS

Hold tool by insulated gripping surfaces

when performing an operation where the

cutting tool may contact hidden wiring or

its own cord. Contact with a "live" wire will

make exposed metal parts of the tool "live"

and shock the operator. Do not drill, fasten or

break into existing walls or other blind areas

where electrical wiring may exist. If this situ-

ation is unavoidable, disconnect all fuses or

circuit breakers feeding this worksite.

Never leave the trigger locked "ON".

Before plugging the tool in, check that the

trigger lock is "OFF". Accidental start-up

could cause injury.

Keep hands away from cutting area. Do

not reach under the material being cut.

The proximity of the blade to your hand is

hidden from your sight.

Keep hands from between the gear hous-

ing and saw blade holder. The reciprocat-

ing blade holder can pinch your fingers.

Do not use dull or damaged blades. Bent

blade can break easily or cause kickback.

Before starting to cut, turn tool "ON" and

allow the blade to come to full speed. Tool

can chatter or vibrate if blade speed is too

slow at beginning of cut and possibly kick-

back.

Always wear safety goggles or eye pro-

tection when using this tool. Use a dust

mask or respirator for applications which

generate dust.

are caused by poorly maintained tools.

Develop a periodic maintenance schedule

for your tool.

Use only accessories that are recom-

mended by the manufacturer for your

model. Accessories that may be suitable for

one tool, may become hazardous when

used on another tool.

Tool service must be performed only by

qualified repair personnel. Service or

maintenance performed by unqualified per-

sonnel could result in a risk of injury. For

example: internal wires may be misplaced

or pinched, safety guard return springs may

be improperly mounted.

Secure material before cutting. never hold

it in your hand or across legs. Small or thin

material may flex or vibrate with the blade,

causing loss of control.

Make certain the blade holder is tight

before making a cut. A loose holder can

cause the tool or blade to slip and loss of

control may result.

When removing the blade from the tool,

avoid contact with skin and use proper

protective gloves when grasping the

blade or accessory. Accessories may be

hot after prolonged use.

Some dust created by

WARNING

sawing, grinding, drilling,

and other construction activities contains

chemicals known to cause cancer, birth

defects or other reproductive harm. Some

examples of these chemicals are:

•

Lead from lead-based paint.

•

Crystalline silica from bricks and cement

and other masonry products, and

•

Arsenic and chromium from chemically

treated lumber.

Your risk from these exposures varies,

depending on how often you do this type of

work. to reduce your exposure to these

chemicals, work in a well ventilated area, and

work with approved safety equipment, such

as those dust masks that are specially

designed to filter out microscopic particles.

Service