Dremel MS400 Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Säge Dremel MS400 herunter. Dremel MS400 8 Seiten. Xrp multisaw

Seite drucken

GETTING TO KNOW YOUR XPR MULTISAW

Unpacking & Checking Contents

Disconnect the plug from

WARNING

the power source before

making any assembly, adjustments or

changing accessories. Such preventative

safety measures reduce the risk of starting

the tool accidentally.

Separate all loose parts from packing materi-

als and check each item with the contents

listed on the carton to make sure all items are

accounted for before discarding any packing

material.

IMPORTANT! If any parts are missing, or if

you require any assistance with these

instructions,

please

Consumer Service at:

1-800-437-3635

or at www.Dremel.com.

1. Remove the collet nut, collet and hous-

ing cap from rotary tool.

NOTE: Housing cap must be re-installed on

rotary tool when XPR MultiSaw is removed.

2. Install driver nut onto rotary tool shaft.

Collet Nut

Collet

Housing Cap

Dremel recommends the use of Dremel XPR saw blades. The XPR MultiSaw

comes with a saw blade for straight and curved cuts in wood and soft materi-

als up to 1-7/16" thick. The Dremel XPR MultiSaw accepts all standard jigsaw

blades, both "T" or "U" shank.

No one blade can be efficient for all cutting jobs. Different materials require different blades.

Since your saw can cut so many materials, be sure to use the proper blade for the job to

ensure proper cutting performance.

NOTE: Refer to blade packaging for information on recommended materials and blade usage.

contact

Dremel™

ASSEMBLY

Installing Saw to Rotary Tool

Be sure to align keys on tool

Overthrow Nut

with keyways in overthrow nut.

Blade Selection

Description

The XPR MultiSaw attachment is for use with

Dremel™ 400 Series XPR Rotary tool only.

The Dremel XPR MultiSaw turns your rotary

tool into a multipurpose saw that will allow

you to make straight and curved cuts in a

variety of materials. Scroll cutting patterns is

now fast and easy. Using standard jigsaw

blades, you can cut soft & hard wood, ply-

wood, metal, PVC, plastic, and much more!

Housing

Saw Blade

Footplate

Allen Wrench (2.5 mm)

(for blade installation)

3. Thread the saw onto the rotary tool

housing and tighten overthrow nut

securely. Saw should be positioned so

Dremel markings on tool and saw are

facing same side.

NOTE: Be sure to align keys on tool with key-

ways in overthrow nut.

Driver Nut

Air Vents

Overthrow Nut

Driver Nut

Rubberized Grip

"U" Shank Blade

"T" Shank Blade