Aleratec 330118 Schnellstart-Handbuch - Seite 12

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Computer Hardware Aleratec 330118 herunter. Aleratec 330118 16 Seiten. 1:118 usb copy tower sa

Seite drucken

Using the USB Duplicator

Asynchronous Copying - continued

Press the OK button on the display panel. The USB Duplicator will start to read

the source content into the system's buffer and immediately start copying to

any loaded target USB flash drives.

USB(953M)

Reading...

Load the blank target flash drives into the USB Duplicator. The LCD will

display the number of blank media loaded and copying.

Pass: 0

Fail: 0

Note: When copying is in process the Green LED on the front panel is

blinking. Do not take out the drive while it is copying. When copying

is finished the Green LED stays on (no blinking). If an error occurs

during the copy process a Red LED will display.

As finished drives are removed, and new blanks inserted, the display will show

the number of copies completed and the number of USB flash drives still in the

copying process. If the Copy fails, the LCD will display the number of flash

drives that failed and passed.

Pass: 5

Fail: 0

Note: During Asynchronous Copying you can use the UP and DOWN

arrow keys to check each flash drives copying status.

93M



ESC

Working



ESC

Working



ESC