Aleratec 330118 빠른 시작 매뉴얼 - 페이지 12

{카테고리_이름} Aleratec 330118에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aleratec 330118 16 페이지. 1:118 usb copy tower sa

Using the USB Duplicator

Asynchronous Copying - continued

Press the OK button on the display panel. The USB Duplicator will start to read

the source content into the system's buffer and immediately start copying to

any loaded target USB flash drives.

USB(953M)

Reading...

Load the blank target flash drives into the USB Duplicator. The LCD will

display the number of blank media loaded and copying.

Pass: 0

Fail: 0

Note: When copying is in process the Green LED on the front panel is

blinking. Do not take out the drive while it is copying. When copying

is finished the Green LED stays on (no blinking). If an error occurs

during the copy process a Red LED will display.

As finished drives are removed, and new blanks inserted, the display will show

the number of copies completed and the number of USB flash drives still in the

copying process. If the Copy fails, the LCD will display the number of flash

drives that failed and passed.

Pass: 5

Fail: 0

Note: During Asynchronous Copying you can use the UP and DOWN

arrow keys to check each flash drives copying status.

93M



ESC

Working



ESC

Working



ESC