Atlas Donaire Anleitung Handbuch - Seite 11

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Fan Atlas Donaire herunter. Atlas Donaire 13 Seiten. 52” ceiling fan

Seite drucken

1. Operating the Remote Control

11. OPERATING THE

REMOTE CONTROL

Install 12V MN21/A23 battery (included).

To prevent damage to transmitter, remove the

battery if not used for long periods. (Fig. 16)

Restore Power to Ceiling Fan.

A. H, M, L Buttons:

These buttons are used to set the fan speeds as

follows;

L: Low Speed

M: Medium Speed

H: High Speed

B. OFF Button:

This button turns the fan off. When fan is turned

off, a momentary increase in speed can occur

before the fan slows and then finally stops.

C. ACCESSORY Button:

This button is used to turn on and off the light kit

and also controls the brightness setting. Press

and release this button to turn the light on or off.

Press and hold the button to set the desired

brightness. The light button has an auto-

resume, it will stay at the same brightness as

the last time it was turned off.

D. REV Button:

This button is to control fan direction.

12. OPERATING YOUR

FAN

Speed settings for warm or cool weather depend

on factors such as the room size. Ceiling height,

number of fans and so on.

NOTE: To operate the reverse function on this

fan, press the reverse button while the fan is

running.

Warm weather - (Forward) A downward airflow

creates a cooling effect as shown in Fig. 18.

This allows you to set your air conditioner on a

warmer setting without affecting your comfort.

Cool weather - (Reverse) An upward airflow

moves warm air off the ceiling area as shown in

Fig. 19. This allows you to set your heating unit

on a cooler setting without affecting your comfort.

Figure 16

REV

Figure 17

Figure 18

Figure 19